Lavtlaster tilhengerMÜLLER-MITTELTAL
        Tandemtieflader, Lufrfederung, Gitterrostrampen    
 Lavtlaster tilhenger
MÜLLER-MITTELTAL
        Tandemtieflader, Lufrfederung, Gitterrostrampen    
                                                     fast pris pluss MVA                                            
                                            € 31 900                                    
                        (€ 37 961 brutto)                    
                produksjonsår            
                2025            
            Tilstand        
            Ny                    
            Plassering        
                                                Egestorf                                            

 Bilder viser            
 Vis kart            
Grunnleggende data
Pris og beliggenhet
                             fast pris pluss MVA                    
                            € 31 900                    
                (€ 37 961 brutto)            
- Selgers plassering:
-     Eichenstich 12, 21272 Egestorf, Tyskland             
 Ring            
Tekniske detaljer
- Maksimal lastevekt:
- 10 500 kg
- Totalvekt:
- 14 400 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 7 000 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A104-26-931
- Referansenummer:
- 6285
- Oppdatering:
- sist oppdatert 10.07.2025
Beskrivelse
        * EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
Rjdpfxsl Thvxs Agrsch
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
Rjdpfxsl Thvxs Agrsch
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
            Merk:        Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.    
Registrert siden: 2001
Send forespørsel
Telefon & Faks
                            +49 40 33... annonser                
 Disse annonsene kan også være av interesse for deg.
            Annonsen din har blitt slettet            
            Det har oppstått en feil            

















































