Lavtlaster tilhengerMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Lavtlaster tilhenger
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Fast pris pluss MVA
28 250 €
(33 618 € brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Grunnleggende data
Pris og beliggenhet
Fast pris pluss MVA
28 250 €
(33 618 € brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
Dimensjoner og vekt
Totalvekt:
11 900 kg
Maksimal lastevekt:
8 650 kg
Lasteromslengde:
5 000 mm
Lasteplassbredde:
2 420 mm
Lasteromshøyde:
500 mm
Aksler og hjul
Akselkonfigurasjon:
2 aksler
Detaljer om tilbudet
- Annonse-ID:
- A104-26-970
- Referansenummer:
- 61561
- Oppdatering:
- sist oppdatert 29.09.2026
Beskrivelse
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connecting cables for forestry and agricultural tractors
* LED taillights
----General components:
* Mechanical support jacks at the front
* 2 mechanical folding supports at the rear
* Plastic tool box on the right side
* 2-step entry on the front left side in the direction of travel
* Underrun protection, bolted
* Plastic quarter fenders
Tjdpfxjl Thw Io Apajc
----Tipping platform:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 on the front wall
* Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side panel spring lifters, folding tailgate, and pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5-ton lashing point in each corner
* Plus 4 x 3-ton lashing points on each side, recessed in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber tires and tracked vehicles
* Lockable storage compartment at the rear, below the loading area, integrated into the chassis
----Tires:
* Tire size: 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports, and rear supports hot-dip galvanized
* Axles, springs, air tank, flange coupling, and support jacks painted in a black tone
* Side panels painted in RAL 9010 pure white
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale are subject to change
----Delivery time:
* Available from approximately week 47/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connecting cables for forestry and agricultural tractors
* LED taillights
----General components:
* Mechanical support jacks at the front
* 2 mechanical folding supports at the rear
* Plastic tool box on the right side
* 2-step entry on the front left side in the direction of travel
* Underrun protection, bolted
* Plastic quarter fenders
Tjdpfxjl Thw Io Apajc
----Tipping platform:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 on the front wall
* Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side panel spring lifters, folding tailgate, and pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5-ton lashing point in each corner
* Plus 4 x 3-ton lashing points on each side, recessed in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber tires and tracked vehicles
* Lockable storage compartment at the rear, below the loading area, integrated into the chassis
----Tires:
* Tire size: 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports, and rear supports hot-dip galvanized
* Axles, springs, air tank, flange coupling, and support jacks painted in a black tone
* Side panels painted in RAL 9010 pure white
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale are subject to change
----Delivery time:
* Available from approximately week 47/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
172 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Vellykket
Meldingen din er sendt.
Annonse
Egestorf
816 km
Tresidet tipphenger
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Annonsen din har blitt slettet
Det har oppstått en feil























































