Lavtlaster tilhengerMÜLLER-MITTELTAL
11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Lavtlaster tilhenger
MÜLLER-MITTELTAL
11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
fast pris pluss MVA
€ 28 900
(€ 34 391 brutto)
produksjonsår
2024
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 28 900
(€ 34 391 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 8 850 kg
- Totalvekt:
- 11 900 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 5 000 mm
- Lasteplassbredde:
- 2 420 mm
- Lasteromshøyde:
- 500 mm
Detaljer om tilbudet
- Annonse-ID:
- A104-27-018
- Referansenummer:
- 58751 a
- Oppdatering:
- sist oppdatert 10.07.2025
Beskrivelse
* KA-TA-R 11.9 "Masterline":
* Hot-dip galvanized floor and bulkhead
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Tire pressure monitoring system
* Drum brakes
* 2 x 5.5 ton BPW axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* 15-pin power connector
* LED lighting
* Bolted underride protection
* Plastic quarter fender
* Net hooks on the sides and rear in the central locking bearings, as well as two on the front wall
* Steel pallet 3-way tipping body (continuous side walls - without center stanchions - foldable with side wall spring lifter)
* Bolted rear stanchions
* Combination steel wing doors, rear wall with two asymmetrical wings, divided by 270°, pivoting and locking, not foldable, and with additional pendulum frames for automatic rear wall opening during tipping. Locking via galvanized espagnolette and central locking
* Deactivation function for automatic rear wall function when tipping backwards with the wing door open
* 1 x 5 ton lashing ring in each corner and on the sides 4 x 3-ton lashing eyes embedded in the outer frame, 4 mm sheet steel floor, rear mounting rail for the landing ramps
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum landing ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-lockable storage compartment embedded in the chassis below the loading area
* Front wall, tipping platform, rear stanchions, underrun protection, mechanical Hot-dip galvanized drop legs
* Side walls and tailgate painted in RAL 9010 pure white
* Side walls can be painted in a RAL color for an additional charge
Hedpsl Thymsfx Abzsw
* Axles, springs, flanged towing eye, air chamber, and landing gear painted in a black color
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available for immediate delivery from Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* Hot-dip galvanized floor and bulkhead
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Tire pressure monitoring system
* Drum brakes
* 2 x 5.5 ton BPW axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* 15-pin power connector
* LED lighting
* Bolted underride protection
* Plastic quarter fender
* Net hooks on the sides and rear in the central locking bearings, as well as two on the front wall
* Steel pallet 3-way tipping body (continuous side walls - without center stanchions - foldable with side wall spring lifter)
* Bolted rear stanchions
* Combination steel wing doors, rear wall with two asymmetrical wings, divided by 270°, pivoting and locking, not foldable, and with additional pendulum frames for automatic rear wall opening during tipping. Locking via galvanized espagnolette and central locking
* Deactivation function for automatic rear wall function when tipping backwards with the wing door open
* 1 x 5 ton lashing ring in each corner and on the sides 4 x 3-ton lashing eyes embedded in the outer frame, 4 mm sheet steel floor, rear mounting rail for the landing ramps
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum landing ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-lockable storage compartment embedded in the chassis below the loading area
* Front wall, tipping platform, rear stanchions, underrun protection, mechanical Hot-dip galvanized drop legs
* Side walls and tailgate painted in RAL 9010 pure white
* Side walls can be painted in a RAL color for an additional charge
Hedpsl Thymsfx Abzsw
* Axles, springs, flanged towing eye, air chamber, and landing gear painted in a black color
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available for immediate delivery from Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil





























































