Lavtlaster tilhengerMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Lavtlaster tilhenger
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
fast pris pluss MVA
€ 35 900
(€ 42 721 brutto)
Produksjonsår
2025
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 35 900
(€ 42 721 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 14 400 kg
- Totalvekt:
- 19 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 6 270 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A107-45-933
- Referansenummer:
- 6160
- Oppdatering:
- sist oppdatert 08.01.2026
Beskrivelse
* ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering system
* Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber tail lights
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture for retrofitting container locks in front of the bulkhead
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion
* Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm
* Option to install 3 ton drop lashing rings every 600 mm
* Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options
* One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* ---Axles, air reservoir, flange towing eye, and landing gear painted in black---
* Unloaded loading height approx. 940 mm
* Loaded loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available immediately from Egestorf
Gjdomi Tcqepfx Ab Aoil
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering system
* Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* Multi-chamber tail lights
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture for retrofitting container locks in front of the bulkhead
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion
* Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm
* Option to install 3 ton drop lashing rings every 600 mm
* Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options
* One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* ---Axles, air reservoir, flange towing eye, and landing gear painted in black---
* Unloaded loading height approx. 940 mm
* Loaded loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available immediately from Egestorf
Gjdomi Tcqepfx Ab Aoil
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Egestorf
816 km
Tilhenger med arbeidsplattform
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Annonse
Gralla
1 590 km
Lavtlaster tilhenger
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Annonse
Bovenden
992 km
Lavtlaster tilhenger
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
Annonse
Triptis
1 102 km
Lav laster
FlieglDTS 300 P
FlieglDTS 300 P
Annonsen din har blitt slettet
Det har oppstått en feil


































































































