Tresidet tipphengerMÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Tresidet tipphenger
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
fast pris pluss MVA
€ 26 500
(€ 31 535 brutto)
Produksjonsår
2024
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 26 500
(€ 31 535 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 8 780 kg
- Totalvekt:
- 11 900 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 5 000 mm
- Lasteplassbredde:
- 2 420 mm
- Lasteromshøyde:
- 500 mm
Detaljer om tilbudet
- Annonse-ID:
- A128-69-375
- Referansenummer:
- 6013
- Oppdatering:
- sist oppdatert 07.01.2026
Beskrivelse
* KA-TA-R 11.9 Masterline:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Side-mounted toolbox made of galvanized sheet steel, on the right
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* Bolted underrun protection with LED tail lights
----Tipper Body:
* Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall
* Hot-dip galvanized chassis
* Steel pal. three-way tipper body, fully galvanized
Fsdpfxepk D D Uj Afrspb
* Continuous side walls, without central stanchion, foldable, with drop side spring supports
* Tailboard can be folded down and used as a swinging gate, with manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side
* 4 mm steel floor, with slot rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced, load securing certificate according to EN 12642 XL
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Immediately available ex Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Side-mounted toolbox made of galvanized sheet steel, on the right
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* Bolted underrun protection with LED tail lights
----Tipper Body:
* Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall
* Hot-dip galvanized chassis
* Steel pal. three-way tipper body, fully galvanized
Fsdpfxepk D D Uj Afrspb
* Continuous side walls, without central stanchion, foldable, with drop side spring supports
* Tailboard can be folded down and used as a swinging gate, with manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side
* 4 mm steel floor, with slot rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced, load securing certificate according to EN 12642 XL
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Immediately available ex Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil























































