Working platform semitrailer

MÜLLER-MITTELTAL 3- achs Satteltiefl.-Luft-Lenk,hydr. Auffahrram.

* TS 3 Profile 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes

----Axles:

* 3 x 11-ton BPW Eco Plus axles
* Last axle with trailing steering and electropneumatic steering lock

----Suspension:

* Air suspension with lifting and lowering system and ride height control valve

----Electrical System / Lighting:

* TPMS (Tire Pressure Monitoring System)
* Smartboard control box mounted on the trailer as an information tool, with pressure sensors for displaying total axle load
* 15-pin electrical connector
* LED lighting system 12 / 24V
* LED rotating beacon (detachable) rear left

----General Components:

* Side impact protection
* Front support winch and mechanical swivel supports at the rear of the chassis
* Straight steel sheet fenders
* Spare wheel holder under the chassis on the right side

----Low Loader Platform:

* Saddle platform with 45° beveled front corners and a front toolbox made of galvanized steel sheet, dimensions: W = 2,480 x H = 500 x L = 665 mm with a hinged lid
* On the side of the saddle platform, 400 mm aluminum sideboards (RAL 9010 pure white) that can be folded down and removed
* Rear wall, height -150 mm, mounted
* Rear slope on the saddle platform for the low bed, approx. 700 mm long
* Saddle platform with 50 mm wooden planks and low loader platform with 60 mm wooden planks
* Tread plate over the axles

----Extensions:

* 8 x mechanical folding extensions to a total width of 3 m, but not in the rear slope (extension planks available for storage on the saddle platform)
* Mechanically adjustable warning sign packages at the front and rear

----Load Securing System:

* On the saddle platform, 2 x 6.3-ton lashing points each, and on the side, 3 x 5-ton lashing bars in the outer frame
* In the low loader platform, on the side, 2 x 13.4-ton lashing points each, and 4 x 10-ton lashing points that can be swiveled and lowered, recessed in the outer frame
* On the side, 2 x 6.4-ton lashing rings each, and 1 lashing point at the rear in the excavator arm support
* 2 x container locks directly behind the bend in the low loader platform

----Excavator Arm Support:

* Excavator arm support from the end of the last fixed axle to the steering axle to the end crossmember, continuous with an internal reinforcing profile, approx. L = 2,450 x W = 770 mm x D = 270 mm

----Ramps:

* Mechanical, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable on the side)
* Control block, 4-way, for later customer retrofitting of hydraulic ramp adjustment
* The outer plank on the ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and in the approach slope

----Hydraulics:

* Hydraulic distributor in the trailer (with hydraulic pump output in the truck of over 40 liters up to 120 liters/min)

----Loading Dimensions:

* Loading area of the saddle platform: approx. 3,935 x 2,480 mm
* Low bed loading area: approx. 8,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
Credpfx Ajpk D I Asktei

----Saddle Height:

* approx. 1,220 mm (suitable for 2- and 3-axle semi-trailers)

----Paintwork:

* Chassis, ramps, rear folding supports, extension brackets hot-dip galvanized
* Axles, support winch, air tank painted in a black tone
* Vehicle is hot-dip galvanized

----Information:

* New vehicle with manufacturer's warranty
* Subject to errors and prior sale

----Delivery Time:

* Available for immedia

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.