Lavtlaster tilhengerMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Lavtlaster tilhenger
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Fast pris pluss MVA
32 950 €
(39 210 € brutto)
Produksjonsår
2024
Tilstand
Ny
Plassering
Egestorf 

Grunnleggende data
Pris og beliggenhet
Fast pris pluss MVA
32 950 €
(39 210 € brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 14 550 kg
- Totalvekt:
- 19 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 6 270 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A128-69-474
- Referansenummer:
- 5954
- Oppdatering:
- sist oppdatert 11.06.2026
Beskrivelse
ETÜ-TA-R 19.0
----Brakes:
Lredpopk D Ncofx Alten
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11-ton Gigant axles
----Suspension:
* Air suspension with manual lowering at the rear
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm on the right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
----Lowbed Deck:
* Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm
* 50 mm softwood flooring, clamped version
* Pre-fitted for subsequent installation of container locks in front of the bulkhead
* Bolted smooth sheet steel bulkhead
* Drop sides made of trapezoidal profile steel – folding, with drop-side lift support
* Steel rear wall, can be slid between the ramps – storage holder in front of bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame approx. 45 degree flanged with 2 t lashing points every 480 mm
* Optional installation of 3 t folding lashing rings every 600 mm
* In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the bulkhead and end crossmember for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear ramp approach angle approx. 860 mm
----Tires:
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, tailgate, rear folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Sideboard paintwork in RAL 9010 pure white
* Paintwork for the side panels available in any RAL color for an extra charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
Lredpopk D Ncofx Alten
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 11-ton Gigant axles
----Suspension:
* Air suspension with manual lowering at the rear
----Drawbar / Flange Eye:
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm on the right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
----Lowbed Deck:
* Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm
* 50 mm softwood flooring, clamped version
* Pre-fitted for subsequent installation of container locks in front of the bulkhead
* Bolted smooth sheet steel bulkhead
* Drop sides made of trapezoidal profile steel – folding, with drop-side lift support
* Steel rear wall, can be slid between the ramps – storage holder in front of bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame approx. 45 degree flanged with 2 t lashing points every 480 mm
* Optional installation of 3 t folding lashing rings every 600 mm
* In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the bulkhead and end crossmember for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear ramp approach angle approx. 860 mm
----Tires:
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
----Paintwork:
* Chassis, drawbar, bulkhead, tailgate, rear folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Sideboard paintwork in RAL 9010 pure white
* Paintwork for the side panels available in any RAL color for an extra charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
169 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil














































