Lavtlaster tilhengerMÜLLER-MITTELTAL
21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Lavtlaster tilhenger
MÜLLER-MITTELTAL
21 to luftgef. Tandemtieflader mit 3 mtr Rampen
fast pris pluss MVA
€ 37 250
(€ 44 328 brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 37 250
(€ 44 328 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 16 750 kg
- Totalvekt:
- 21 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 7 000 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A144-06-175
- Referansenummer:
- 5968
- Oppdatering:
- sist oppdatert 17.12.2025
Beskrivelse
* ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* At front wall and rear slope, provision for retrofitting container locks for 20" container transport
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear front
* External folding supports at rear
* Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lighting
* Version 21 t GVW with reinforced frame and reinforced axles
* Reinforcement package for drilling rig transport on chassis
* 50 mm softwood floor in clamped version
* At front wall, provision for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Split side walls made of steel sheet – trapezoidal profile – foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps – holder for stowage inside front wall when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing shackles every 600 mm
* Each corner at front and rear with 1 x 10 t lashing ring
* Load securing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes for 1.2 t lashing options in front and rear crossmembers
* One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible down to 20 mm)
* Rear entry slope approx. 860 mm chassis height
* Drawbar, front wall, rear flap, folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Loading height unladen approx. 940 mm
* Loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
Iiodpoq Dyu Ujfx Agbok
* Side wall paint finish in RAL 9010 pure white
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from calendar week 15 / 2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* At front wall and rear slope, provision for retrofitting container locks for 20" container transport
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear front
* External folding supports at rear
* Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lighting
* Version 21 t GVW with reinforced frame and reinforced axles
* Reinforcement package for drilling rig transport on chassis
* 50 mm softwood floor in clamped version
* At front wall, provision for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Split side walls made of steel sheet – trapezoidal profile – foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps – holder for stowage inside front wall when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing shackles every 600 mm
* Each corner at front and rear with 1 x 10 t lashing ring
* Load securing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes for 1.2 t lashing options in front and rear crossmembers
* One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible down to 20 mm)
* Rear entry slope approx. 860 mm chassis height
* Drawbar, front wall, rear flap, folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Loading height unladen approx. 940 mm
* Loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
Iiodpoq Dyu Ujfx Agbok
* Side wall paint finish in RAL 9010 pure white
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from calendar week 15 / 2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Annonsen din har blitt slettet
Det har oppstått en feil


































