Tilhenger med arbeidsplattformMÜLLER-MITTELTAL
11,9 to Tandemtieflader mit Auffahrrampen
Tilhenger med arbeidsplattform
MÜLLER-MITTELTAL
11,9 to Tandemtieflader mit Auffahrrampen
Fast pris pluss MVA
€ 24 950
(€ 29 690 brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Grunnleggende data
- Betegnelse:
- Tilhenger med arbeidsplattform
- Produsent:
- MÜLLER-MITTELTAL
- Produksjonsår:
- 2026
- Tilstand:
- ny
Pris og beliggenhet
Fast pris pluss MVA
€ 24 950
(€ 29 690 brutto)
- Plassering:
- Eichenstich 12, 21272 Egestorf, Deutschland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 8 870 kg
- Totalvekt:
- 11 900 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 6 270 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A145-49-752
- Referansenummer:
- 58531
- Oppdatering:
- sist oppdatert 15.05.2026
Beskrivelse
* ETÜ-TA-R 11.9:
----Brake system:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange towing eye:
* Drawbar height-adjustable by approx. 300 mm
* 40 mm flange towing eye
----General attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding support legs at the rear
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted externally on the front panel
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading area:
* Loading area 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Provision at the front panel for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Side walls foldable, made of trapezoidal-profiled steel sheet with board spring lifts
* Steel rear wall can be inserted between ramp supports; when not in use, stored inside in front of front panel
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, bent at about 45 degrees with 2 t lashing force every 480 mm
* Installation of 3 t drop lashing rings possible every 600 mm
* Each corner at the front and rear: 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing)
* Rear approach angle approx. 860 mm
----Tyres:
* Tyres: 235/75R17.5
Iijdpfx Agjq Ra D Ee Aeb
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and ramps
* Painted side panels in RAL 9010 pure white
* Painting of side walls in other RAL colors available at extra cost
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* Available from calendar week ...
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brake system:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange towing eye:
* Drawbar height-adjustable by approx. 300 mm
* 40 mm flange towing eye
----General attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding support legs at the rear
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted externally on the front panel
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading area:
* Loading area 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Provision at the front panel for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Side walls foldable, made of trapezoidal-profiled steel sheet with board spring lifts
* Steel rear wall can be inserted between ramp supports; when not in use, stored inside in front of front panel
* Rear stanchions bolted
----Load securing:
* Perforated outer frame, bent at about 45 degrees with 2 t lashing force every 480 mm
* Installation of 3 t drop lashing rings possible every 600 mm
* Each corner at the front and rear: 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical access ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing)
* Rear approach angle approx. 860 mm
----Tyres:
* Tyres: 235/75R17.5
Iijdpfx Agjq Ra D Ee Aeb
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and ramps
* Painted side panels in RAL 9010 pure white
* Painting of side walls in other RAL colors available at extra cost
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* Available from calendar week ...
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
172 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Annonse
Fliessem
1 168 km
Kroklastebil
IVECOMagirus Turbo 160-30 AH - Oldtimer- V 8 - Motor
IVECOMagirus Turbo 160-30 AH - Oldtimer- V 8 - Motor
Annonse
Langelsheim
958 km
Kroklaster
MAN26.430 6x2 Retarder Meiller RK 20.70
MAN26.430 6x2 Retarder Meiller RK 20.70
Annonse
Diespeck
1 217 km
Kroklaster
MAN26.403 FL 6x2
MAN26.403 FL 6x2
Annonse
Peine
912 km
Kroklastebil
ANDERE
ANDERE
Annonse
Grevenbroich
1 047 km
Arbeidsplattform
BrenderupMT 3080 Rampenklappe durchgehend
BrenderupMT 3080 Rampenklappe durchgehend
Annonsen din har blitt slettet
Det har oppstått en feil

















































































































