Lavtlaster tilhengerMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Lavtlaster tilhenger
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Fast pris pluss MVA
€ 30 900
(€ 36 771 brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Grunnleggende data
Pris og beliggenhet
Fast pris pluss MVA
€ 30 900
(€ 36 771 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 10 800 kg
- Totalvekt:
- 14 400 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 6 270 mm
- Lasteplassbredde:
- 2 470 mm
Detaljer om tilbudet
- Annonse-ID:
- A152-72-854
- Referansenummer:
- 6247
- Oppdatering:
- sist oppdatert 08.05.2026
Beskrivelse
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic leaf springs with equalising unit
----Drawbar / Flange Tow Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior
* Side underrun protection
* Plastic quarter mudguards
Gjdperwc R Asfx Al Sjub
----Low Loader Deck:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for subsequent fitting of container locks
* Bolted, 400 mm smooth-sheet bulkhead
* Bolted rear stanchions
* Side panels with spring assist
----Load Securing:
* Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing point each in the front and rear corners
* Various drilled holes in the front and rear cross members for 1.2 t lashing options
* Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max)
----Paintwork:
* Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised
* Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone
* Side panels painted in RAL 9010 pure white
* Painting of side walls in any RAL colour available at extra cost
----Info:
* New vehicle with manufacturer’s warranty
* Errors and prior sale reserved
* Sample images
----Delivery time:
* Available immediately ex Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic leaf springs with equalising unit
----Drawbar / Flange Tow Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior
* Side underrun protection
* Plastic quarter mudguards
Gjdperwc R Asfx Al Sjub
----Low Loader Deck:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for subsequent fitting of container locks
* Bolted, 400 mm smooth-sheet bulkhead
* Bolted rear stanchions
* Side panels with spring assist
----Load Securing:
* Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing point each in the front and rear corners
* Various drilled holes in the front and rear cross members for 1.2 t lashing options
* Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max)
----Paintwork:
* Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised
* Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone
* Side panels painted in RAL 9010 pure white
* Painting of side walls in any RAL colour available at extra cost
----Info:
* New vehicle with manufacturer’s warranty
* Errors and prior sale reserved
* Sample images
----Delivery time:
* Available immediately ex Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
172 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil
































































