Semitrailer med lavt lasteplan

Faymonville 3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter

Gooseneck:
-Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 6°
-Technical fifth wheel load: 18,000 kg
-For tractor units: 4 x 2 and 6 x 2

Loading area:
-Loading area, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°
-Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg
-Grating and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area

Ramps:
-A pair of two-part AXS steel ramps with a length of approx. 4,675 mm and a width of approx. 900 mm
-Grating floor
-Hydraulically hinged ramp tips
-Ramps can be moved hydraulically by approx. 235 mm outwards and approx. 365 mm inwards
-Painted sand coating on the outer frame of the ramp and on the ramp tip
-Flashlights on the outside of the ramp tips with switch next to the ramp controls
-Ramp secured in driving position using a quick release

Axles, suspension and tires:
-BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle with self-steering
-1st Axle with traction aid

-Operation via the brake pedal in the tractor unit
-Technical axle load: 12,000 kg
-Air suspension with lifting and lowering valve
-235/75 R 17.5
-TPMS tire pressure monitoring system in accordance with ECE R 141
-TPMS tire pressure monitoring sensors mounted in all wheels including spare wheels

Braking system:
-WABCO EBS-E brand braking system in accordance with EU regulations

Paintwork:
-Semi-trailer MB 7350 Nova gray

Accessories included:
-Bulkhead made of steel, plug-in, approx. 400 mm high
-3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches
-Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide
-JOST module B - static test load = 50,000 kg
-Continuous grating with 5 mm sheet metal underlay as additional reinforcement
-Painted sand coating
-Cutouts in the outer frame of the loading area and the lifting bed for hanging control valves for the hydraulic ramps on the right of the vehicle
Bledpfsuadk Njx Af Dsc
-2" kingpin
-Central lubrication system with 1 pump, brand BEKAMAX
-On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized
-Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
-Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller
-WABCO Smart Board System
-4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.