Tanksemihenger

KÄSSBOHRER Tankauflieger K.STN L 30

Kässbohrer K.STN L 30 stainless steel tank trailer 30m³ for liquid manure

TECHNICAL INFORMATION: External length 9,180 mm
* Height (empty vehicle) 3,960 mm
* Axle distance 5,000 mm
* Rear overhang 3,050 mm
* Fifth wheel height 1,320 mm
* Tank diameter 2,200 mm

TECHNICAL DIMENSIONS: Volume 30.0 m3
* Empty weight 6,045 kg
* Axle capacity is 27,000 kg
* Kingpin capacity of the fifth wheel load is 12,000 kg
* The operating temperature is 80°C
* Test pressure (+H bar) 0.5 bar
* Total weight 39,000 kg

TANK: Cylindrical tank container, with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel
* Number of manholes 1pc.
* Manholes size DN450, 4 x nut tightening with hinged dome cover
* Aluminium walkway
* Access ladder on the left side of the tank
* 1 x 5 M hose holder, large aluminium box open at the top
* Straight flange as preparation for cleaning pipe
* 1 x 8" pipe with flange at the top of the rear of the tank, for discharge by suction
* 1 x 8" pipe with square flange at the front right of the tank, as preparation for a filling indicator
* 6" preparation for a ventilation line
* Preparation for pressure valve
* Preparation for vacuum valve and vacuum

Rcodpfx Asun Em Nea Dok
DISCONNECTION SYSTEM: A transparent pipe made of hard plastic with a diameter of 4" is included at the rear in order to be able to read the level of the transported goods in the tank from the outside
* 1 x 8" plastic filling funnel in front of the suction line at the top of the rear of the tank
* Börger FL1036 hydraulically driven pump with carbon steel housing
* When discharging with the pump, a 6" Perrot coupling with hook closure, which is used on slurry vehicles, is attached to the outlet line.
* The outlet of the outlet line is equipped with 1 manually controlled 6" brass slide valve
* At the inlet of the mixing line in the tank there is 1 x 4" pneumatically controlled gate valve. 1 x pneumatically controlled 8" slide valve made of brass at the inlet of the tank suction line
* 1 x 6" pneumatic vent valve with brass slide
* When unloading with a pump, there is a 6" swivel joint to be able to run the discharge line outlet at the rear of the vehicle from left-right-middle
* 2x6" pneumatic slide valve

DRIVE: Chassis is made of a special aluminum alloy that offers high quality and high strength
* BPW axles 3x9 tons with air suspension and disc brakes
* 1st axle can be lifted
* Aluminum supports
* Tires 385/65 R 22.5"
* Aluminum rims
* KNORR-ILVL electronic air suspension ECAS

OTHER: 1 x bracket suitable for connecting a pump, welded to the frame underrun protection mat in accordance with the regulations

COLORS: Color of the chassis MB 7350 Nova gray (glossy)
* Color The container RAL 9005 black

Painting of the tank in BLACK

The photos may show different equipment.
The text of the construction description is binding!!!

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.