Tippsemi

WIELTON Strong Master 3-Achs Stahlmulde 26 cbm

Total length without chute: 8801 mm
Pjdpfxeutz Uys Affogw
Total length with chute: 8962 mm
Internal length: 7410 mm
Total width: 2550 mm
Internal width: 2346 mm
Internal height: 1515 mm
Track gauge: 2040 mm
Distance: Kingpin to 2nd axle: 4800 mm
Rear overhang without chute: 1296 mm
Rear overhang with chute: 1457 mm
Ground height: 1464 mm
Max. height with tipped body: 8272 mm
Total weight: 36,000 kg
Technical gross weight: 39,000 kg
Axle load: 8,000 kg
Fifth wheel load: 12,000 kg
Load volume: 26 m3
Manufacturer designation for homologation: NW-3 nd
Unladen weight: 6376 kg
The weight is specified with an accuracy of ±3% nd
The manufacturer reserves the right to change the vehicle's technical specifications.

Chassis
Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area.
Welded construction, weight-optimized from high-strength S700 steel.
Air suspension.
Side impact protection made of aluminum profiles according to ECE 73.
2 plastic wheel chocks.
Wheelbase 1310.
Distance: kingpin on 2nd axle: 4800 mm.
Steel underrun protection.
Foldable underrun protection at the rear.

Axles and suspension.
1200 mm fifth wheel height, unloaded.
Number of axles: 3.
Rigid axles.
SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD.
1st lift axle.

Support legs.
SAF Hercules 2-speed transmission supports, full load.

Fenders.
Full PVC fenders - 6 pieces.
Rubber mud flaps with Wielton LOGO behind the third axle

Wheels
6x steel rims 22.5-11.75 ET-120 wheel nut caps

Tires
6x tires 385-65-22.5, manufacturer's choice

Other chassis equipment
Aluminum ladder L=2, 840 mm
Shovel and broom on the chassis, above the fender
Toolbox - 44 L (mounted at the front of the chassis, left side)
Water tank 30 L (mounted in the middle of the chassis, left side)

Body
Volume 26 m3
Front wall tilted 20 degrees
Steel hinged hatch
Internal height 1515 mm
Floor 4.5 mm, side walls 4.5 mm Hardox
Lower tension locks - 2 pcs.

Other body equipment
Operating station on the chassis frame, access on the left in FR (Driver's side)

Cover
PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin)
PVC roll-top tarpaulin

Braking system/Pneumatics
Steel air chamber
Spring-loaded pressure gauge
Automatic lowering when tipping
Wabco 2S/2M braking system

Chassis paint finish
Chassis paint finish RAL 7021 (black-gray)

Body paint finish
All steel parts are blasted twice before painting.
Body paint finish RAL 7001 (silver-gray)

Tarpaint finish
Tarpaint finish RAL 9006 (white aluminum)

Hydraulics
HYVA hydraulic cylinder, eye-mounted top
Hydraulic connection kit 1

Electrics
Full LED lighting
LED reversing light - 1 pc.
2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit
Full LED lighting Aspöck - ECOLED II with flashing side marker lights

Additional systems
Control cable for lift axle from the driver's cab
Pre-assembled brake
This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS.

Marking
Reflective warning signs
Partial contour marking with Wielton logo
Partial contour marking on the side, white
Partial contour marking on the rear, red
Wielton warning sticker

Warranty
24 months for the complete product fr

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.