Tilhengere med lavt lasteplan for anleggsmaskiner

MS Dorse MS TL89-4

CETRATEK 4-Axle Low Loader TL89.4 (EU-COC)

Short Description
Robust low loader for heavy machinery transport. Frame made of high-strength ST-52/S355, optionally fine-grain steel S700. Ramps with 20 t load capacity each, mechanically or hydraulically foldable without loss of capacity. Optionally available as a low-bed trailer; loading height in wheel recess area can be reduced from approx. 900 mm to approx. 500 mm.

Dimensions / Configuration

Total length: 11,914 mm, total height: 3,775 mm (over ramps)
Platform: gooseneck 2,440 mm + loading area 6,750 mm
Width: 2,540 mm (+ 250 mm manual extension on each side)
Coupling → 1st axle: 2,767 mm; → 2nd/3rd axle: 6,136 mm
Axle spacings: front 1,310 mm, rear 1,360 mm
Platform height: 900 mm (low-bed approx. 500 mm), track width 1,850 mm
Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp
Drawbar height: 400–900 mm; turntable Ø 110 (CYR)
Floor: steel + 45 mm hornbeam hardwood, protective lacquer coating

Weights / Capacity

a) GVW 44,000 kg → payload approx. 36,500 kg*
b) On-road 24,000 kg → payload approx. 16,500 kg
* Version a) subject to special approval according to §70 StVZO; certification/DEKRA inspection at extra cost.

Towing eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg
Rear supports: manual (hydraulic optional)

Steel Structure / Chassis

Welding qualification TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175
4 × 11 t axles (TRAX), tires 235/75 R17.5 (16 units, PETLAS or equivalent; Continental/Michelin on request at extra cost), rims 6.75×17.5, air suspension, max. 100 km/h permitted

Brakes / Electrics

WABCO EBS 4S/2M, brake pads 330×200, air tanks 2×80 L + 1×60 L
Brake cylinders: 4× Type 24 + 4× Type 24/30, levers 165 mm
Voltage 24 V (24 V converter required for 12 V towing vehicle)
Side reflectors: 4× LED per side + 2× white front reflectors, taillights 2× LED, 2× triangular reflectors
Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098

Note on tractor operation: 12→24 V converter as well as ABS/EBS connection (ISO 7638) and power supply (e.g. ISO 1185/12098) required for the onboard hydraulics.

Hydraulics (Ramps)
2 cylinders, including changeover valve for operation via the tractor's onboard hydraulics.

Accessories (Selection)
2 toolboxes, 2 wheel chocks (metal), fire extinguisher box
Reflectors (side white/yellow; extendable yellow/red), rectangular rear reflectors
Bjdpfxsu Rbzvj Abzjdi
Lashing eyes: 7 per side + 6 on the platform (10 t per eye)
Mud flaps (front/rear), hose/cable holders on the drawbar

Paint Finish
Sandblasting, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clearcoat

Warranty
2 years on frame structure and axles (excluding accidents/operator error)
2 years on electrical and braking systems (excluding wear parts such as brake pads, accidents/operator error)
1 year on paint finish (excluding accidents/operator error)

Technical and pricing changes reserved. Images are for reference only and may show optional equipment.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.