Åpen semitrailer med presenning

KRONE SD Plane Edscha Bordwände Plane Lenkachse

Krone SD Standard Curtainsider with Edscha Sliding Roof, Drop Sides, Drop Side Flatbed, Curtainsider, Steering Axle (3rd Axle), Lift Axle (1st Axle)

!!! 3,463 mm External Height !!!

----### Edscha Roof can be opened from rear and front ###
### Rear portal through-loading height: 2,000 mm ###
----
Permissible total weight: 36,000 kg
Curb weight: 6,690 kg
Payload: 29,310 kg
Fifth wheel height unladen: 1,200 mm
Loading height: approx. 1,250 mm
SAF axles
Lift axle: 1st axle
Steering axle: 3rd axle
Air suspension
Disc brakes
Edscha sliding roof openable from rear and front
Reinforced sliding tarpaulin, curtain sliding right and left
Side underrun protection right, left & rear
DIN EN 12642 Code XL
2x storage boxes on the left
EBS
ABS
ALB
2x rear LED worklights
Reversing camera
Drop sides (side and rear)
Roll-up tailgate (spring-assisted)
1x worklight on cargo area
Multiple stake pockets on loading platform
24x lashing points left on loading platform
24x lashing points right on loading platform
Wheelbase: 6,400 x 1,310 x 1,310 mm
Loading area (LxWxH): 13,620 x 2,480 x 2,086 mm
External dimensions (LxWxH): 13,950 x 2,550 x 3,463 mm
Drop side height, side: 550 mm
Drop side height, rear: 750 mm
Tyres: 385/65R22.5 on steel rims
Tyre tread depth 1st axle left: 9 mm
Tyre tread depth 2nd axle left: 10 mm
Tyre tread depth 3rd axle left: 2 mm
Tyre tread depth 1st axle right: 7 mm
Tyre tread depth 2nd axle right: 9 mm
Tyre tread depth 3rd axle right: 11 mm

Side curtain has several holes

Further equipment:
Fifth wheel height unladen: 1,200 mm
Multilock outer frame, universal load securing options
2 lashing rings recessed in rear cross member
2" kingpin (corner dimension: 2,040 mm)
For loading area length: 13,620 mm internal
For loading area width: 2,480 mm internal
10 rows of stake pocket cassettes (81x81 mm) with 158 positions, from row 4 with additional lashing points
Rows 1-2: each 11 stake pockets
Row 3: total 3 stake pockets
Rows 4-10: each 19 stake pockets
Bogey distance = 7,630 mm
Wheelbase: 1,310 / 1,310 mm
SAF axles with air suspension and disc brakes
Raise/lower device with automatic driving height return
Fully automatic electronic lift axle control for 1st axle, depending on load
Manual override function on control panel for forced lifting
Lift/trailing axle pre-wired for remote operation from the tractor unit (without tractor installation)
Combination steering axle/lift axle
SAF air-sprung axle unit + trailing steering axle
Manual & electro-pneumatic reverse lock for steering axle
Pre-wired for electro-pneumatic reverse lock for remote operation from tractor unit
EBS system, 4S/3M, 4 sensors on two axles
Reversing lights
Delta rubber buffer at rear crossmember
2x tool/storage boxes, plastic, max. load 50 kg each
30 mm thick, waterproof board floor, edges fully sealed
Edscha sliding roof (Profi 125) with steel hinges, construction height 125 mm, gradient 0 mm
Internal height at lower edge of outer beam at front, side: 2,000 mm
Internal height at lower edge of outer beam at rear, side: 2,000 mm
Internal height at lower edge of center crossmember: 2,090 mm
Rear portal through-loading height: 2,000 mm
Gjdpfewzz T Uox Adkjbw
Front wall cover hood supported by gas struts, foldable and can be slid backwards with roof frame
Diagonal bracing in roof
Continuous steel front wall with stable corner stanchions, side restricted loading
Front wall reinforcement inside with 9 mm phenolic plywood

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.