Lavtlaster tilhengerMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Lavtlaster tilhenger
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Fast pris pluss MVA
27 950 €
(33 260 € brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Grunnleggende data
Pris og beliggenhet
Fast pris pluss MVA
27 950 €
(33 260 € brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 10 760 kg
- Totalvekt:
- 14 400 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 6 270 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A200-96-220
- Referansenummer:
- 59111 b
- Oppdatering:
- sist oppdatert 11.06.2026
Beskrivelse
* ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with equalizer
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Lighting / Electrical system:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General components:
Bodoxglh Rjpfx Ai Dsli
* Jost front support leg
* Outboard, hot-dip galvanized folding support legs at the rear
* Plastic toolbox on the front right, outside on the front panel
* Lateral impact protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm softwood flooring
* Provision in front of the front panel for retrofitting container locking devices
* Bolted front panel made of smooth sheet metal
* Steel sheet metal side walls – trapezoidal profile – foldable with side panel spring lifters
* Steel rear panel can be slid in between the ramps – bracket for storage when not in use inside the front panel
* Rear crossmembers bolted
----Load securing:
* Perforated outer frame, angled at approx. 45 degrees, with a lashing force of 2 tons every 480 mm
* Installation of 3-ton lashing eyes possible every 600 mm
* 1 x 6.3-ton lashing point each in the front and rear corners
* Various holes in the front and end members for 1.2-ton lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front panel, ramps and rear panel
* Side panel color in RAL 9010 pure white
* Painting of the side walls in a RAL color possible at an extra charge
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approx. week 30/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with equalizer
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Lighting / Electrical system:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General components:
Bodoxglh Rjpfx Ai Dsli
* Jost front support leg
* Outboard, hot-dip galvanized folding support legs at the rear
* Plastic toolbox on the front right, outside on the front panel
* Lateral impact protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm softwood flooring
* Provision in front of the front panel for retrofitting container locking devices
* Bolted front panel made of smooth sheet metal
* Steel sheet metal side walls – trapezoidal profile – foldable with side panel spring lifters
* Steel rear panel can be slid in between the ramps – bracket for storage when not in use inside the front panel
* Rear crossmembers bolted
----Load securing:
* Perforated outer frame, angled at approx. 45 degrees, with a lashing force of 2 tons every 480 mm
* Installation of 3-ton lashing eyes possible every 600 mm
* 1 x 6.3-ton lashing point each in the front and rear corners
* Various holes in the front and end members for 1.2-ton lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front panel, ramps and rear panel
* Side panel color in RAL 9010 pure white
* Painting of the side walls in a RAL color possible at an extra charge
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approx. week 30/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
171 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Annonse
Egestorf
816 km
Tilhenger med arbeidsplattform
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Annonsen din har blitt slettet
Det har oppstått en feil






























































































































