Semitrailer med åpent lasteplan

Schwarzmüller RH 230 Plateau | hydr. zwangslenkenkt

LOCATION: 73230 Kirchheim unter Teck
-
3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering
Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request
Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408
Mileage: 7,700 km
-
Weights
Gross technical weight: 39 t
Axle unit load (technical): 27 t
Fifth wheel load (technical): 12 t

DIMENSIONS
Internal length approx. 13,500 mm
Internal width approx. 2,480 mm
Max. overall width: 2,550 mm
Loading height front approx. 230 mm above ASH = approx. 1,360 mm
Coupling height unladen approx. 1,130 mm
Nwedpsxq S H Isfx Adhjb

CHASSIS
- Welded steel frame construction
- Reinforced for 20 t load at center over 4 m loading length
- Frame height front approx. 230 mm
- 2" interchangeable kingpin
- Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor
- 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each
- 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards
- 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame
- 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN

AXLES
- BPW EcoDisc axles with 430 mm disc brakes (22.5" disc)
- Load capacity 9 t/axle, on-road specification
- 1st axle rigid
- 2nd and 3rd axles with bogie installation for forced steering

STEERING
- Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use
- Automatic forced steering, front turntable with steering wedge
- Steering transmission via two tie rods, rear axles with bogie
- Central lubrication points for steering at the front turntable and rear bogie
- Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction

BRAKE SYSTEM / SUSPENSION
- EBS system 2S2M, one axle sensor-controlled
- RSS/RSP stability program
- Spring-actuated parking brake on 2 axles
- Aluminum air tanks
- Brake/air connections with Quattromatic quick coupling
- EBS/ABS socket at the front
- Air suspension with lifting/lowering function, total stroke approx. 200 mm
- Automatic adjustment to programmed ride height from 15 km/h

ASSISTANCE / SAFETY SYSTEMS
- Axle load display via EBS CAN bus signal for in-cab display
- Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.)

FLOOR
- 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams
- Floor load capacity 7,200 kg forklift axle load

ACCESSORIES / GENERAL
- Aluminum forklift protection strip bolted to both sides of the outer frame
- Aluminum forklift protection strip, rear crosswise
- Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides
- Galvanized steel toolbox / monochrome painted lid
- 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame

Very good condition, German registration documents, immediately available.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.