AvrullingsbeholderDecker Containerbau
Späne, Container, Absaug, ca.34m³
Avrullingsbeholder
Decker Containerbau
Späne, Container, Absaug, ca.34m³
produksjonsår
2025
Tilstand
Ny
Plassering
Sankt Wolfgang 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
- Plassering:
- Am Schmiedanger 11, 84427 Sankt Wolfgang, DE

Ring
Tekniske detaljer
- Innvendig høyde:
- 2 400 mm
- Innvendig lengde:
- 6 000 mm
- Innvendig bredde:
- 2 350 mm
Detaljer om tilbudet
- Annonse-ID:
- A204-38-590
- Oppdatering:
- sist oppdatert 03.11.2025
Beskrivelse
Chip Container approx. 34m³
Immediately available from stock 84427 St. Wolfgang
Standard Equipment of Chip Container:
- Internal dimensions: L 6000 mm x W 2350 mm x H 2400 mm
- Base frame: INP 180
- Hook height: 1570 mm
- Lifting bracket: 60 mm
- C-locking mechanism
- External steel rollers, greasable and replaceable
- UVV tested according to DIN 30722-1 (15,000 kg)
- Removable ladder at the front end, finished in RAL 3002 Carmine Red
Floor:
- 4 mm S 235 steel plate
- Rib spacing: 750 mm
- Rib profile: 80 x 50 x 4 mm
Walls:
- 3 mm S 235 steel plate
- Rib spacing: 750 mm
- Rib profile: 80 x 50 x 4 mm
- Surrounding rectangular tube frame 120 x 60 x 4 mm
- Without belly ribs
Floor to wall connection:
- 45° floor to wall angle
Additional equipment:
- On both upper corners of the front wall: two pipe connections left and right, positioned 400 mm from the outside, with inner diameter 220 mm and 8-hole round flange; pipe protrusion at the front between 100 mm
- On the center of the front wall: two pipe sockets with 60 mm outer diameter (2") and external thread, positioned at a height of 2000 mm and 2150 mm; pipe protrusion at the front between 80 mm and 100 mm
- Sprinkler pipe centrally installed beneath the roof
Rear:
Bodjxt Dv Tepfx Abzoww
- Pendulum door with continuous rubber seal
- Compression using eye bolts for sealing, therefore no wing doors
- Road lock via over-center latch
Roof/Cover:
- Fixed roof designed as a gable roof with approx. 10 cm raised center
- 2 explosion flaps in the roof, positioned front right and rear right on the container
Corrosion Protection:
- Primed inside and outside
Paintwork:
- Synthetic resin paint outside in RAL 7016 Anthracite
Bebkk Igoxrbqrj Rzsdi
Suitable for trailers from Pronar, Krampe, Fliegl
Available from stock 84427 St. Wolfgang
- Subject to prior sale -
Payment terms: 100% payment before loading.
Goods remain our property until full payment is received.
Our General Terms and Conditions apply.
Offer is non-binding without guarantee or warranty.
We will gladly prepare a non-binding offer for you.
You can find our complete product range at decker-containerbau.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Immediately available from stock 84427 St. Wolfgang
Standard Equipment of Chip Container:
- Internal dimensions: L 6000 mm x W 2350 mm x H 2400 mm
- Base frame: INP 180
- Hook height: 1570 mm
- Lifting bracket: 60 mm
- C-locking mechanism
- External steel rollers, greasable and replaceable
- UVV tested according to DIN 30722-1 (15,000 kg)
- Removable ladder at the front end, finished in RAL 3002 Carmine Red
Floor:
- 4 mm S 235 steel plate
- Rib spacing: 750 mm
- Rib profile: 80 x 50 x 4 mm
Walls:
- 3 mm S 235 steel plate
- Rib spacing: 750 mm
- Rib profile: 80 x 50 x 4 mm
- Surrounding rectangular tube frame 120 x 60 x 4 mm
- Without belly ribs
Floor to wall connection:
- 45° floor to wall angle
Additional equipment:
- On both upper corners of the front wall: two pipe connections left and right, positioned 400 mm from the outside, with inner diameter 220 mm and 8-hole round flange; pipe protrusion at the front between 100 mm
- On the center of the front wall: two pipe sockets with 60 mm outer diameter (2") and external thread, positioned at a height of 2000 mm and 2150 mm; pipe protrusion at the front between 80 mm and 100 mm
- Sprinkler pipe centrally installed beneath the roof
Rear:
Bodjxt Dv Tepfx Abzoww
- Pendulum door with continuous rubber seal
- Compression using eye bolts for sealing, therefore no wing doors
- Road lock via over-center latch
Roof/Cover:
- Fixed roof designed as a gable roof with approx. 10 cm raised center
- 2 explosion flaps in the roof, positioned front right and rear right on the container
Corrosion Protection:
- Primed inside and outside
Paintwork:
- Synthetic resin paint outside in RAL 7016 Anthracite
Bebkk Igoxrbqrj Rzsdi
Suitable for trailers from Pronar, Krampe, Fliegl
Available from stock 84427 St. Wolfgang
- Subject to prior sale -
Payment terms: 100% payment before loading.
Goods remain our property until full payment is received.
Our General Terms and Conditions apply.
Offer is non-binding without guarantee or warranty.
We will gladly prepare a non-binding offer for you.
You can find our complete product range at decker-containerbau.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Send forespørsel
Telefon & Faks
+49 8081 ... annonser
Annonsen din har blitt slettet
Det har oppstått en feil










