Lav lasterHumbaur
HBT 106224 BS Basic abgeschrägt
Lav laster
Humbaur
HBT 106224 BS Basic abgeschrägt
fast pris pluss MVA
€ 20 890
(€ 24 859 brutto)
Tilstand
Ny
Plassering
Burghaun 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 20 890
(€ 24 859 brutto)
- Plassering:
- Burghaun, Tyskland

Ring
Tekniske detaljer
- Akselkonfigurasjon:
- 2 aksler
- Utstyr:
- ABS
Detaljer om tilbudet
- Annonse-ID:
- A211-20-182
- Referansenummer:
- hbt106224-1
- Oppdatering:
- sist oppdatert 29.01.2026
Beskrivelse
Humbaur HBT 106224 BS Basic, tapered version
Technical data:
Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
Gross vehicle weight: 11,900 kg
Payload: approx. 9,100 kg
Wheelbase: 990 mm
Tyres: 235/75 R17.5 inches
Loading height: approx. 920 mm
Drawbar length: approx. 1800 mm
Coupling height: approx. 750-1000 mm
Ramp angle: approx. 16°
Plank length: approx. 2600 mm
Plank width: approx. 540 mm
3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor
7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame
Standard equipment:
Pgodpfx Aoyfvg Aedhjg
Axles: Axles from renowned manufacturers
Suspension: Low-maintenance parabolic suspension with load compensation
Tyres: Manufacturer’s tyres of choice on steel rims
Braking system: ABS braking system per ECE directive, with ALB function
ABS plug connection ISO 7638
Spindle parking brake
2 interchangeable coupling heads (red/yellow) ISO 1728
Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank
Electrics: 24V lighting system with multifunction rear lights and LED side marker lights
15-pin connector for lighting
Frame: Heavy-duty, welded and hot-dip galvanised frame
Tapered rear end, 12° incline
Floor: 40 mm softwood planks
Side panels: Anodised aluminium side panels, laterally foldable and removable
Corner stanchions, galvanised, insertable front and rear
Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable
Ramp lifters: 1 gas strut per ramp
Ramp lock at rear stanchion
Ramp coating: galvanised grating
Supports: Reinforced 12 t gearbox support winch with load and fast gear
2 telescopic folding supports at left and right rear of vehicle
Features: Steel mudguards with antispray mats
Side underrun protection up to the 1st axle, foldable
2 wheel chocks with holder
Contour marking at side and rear
Space for two-line licence plate on the left ramp
A leasing or financing offer is available on request.
Mr. Seidel (Tel.) will be happy to assist you.
Further information is available on our homepage.
... Subject to errors, changes, and prior sale!!!
= Additional information =
GVW: 11,900 kg
External dimensions: 0 x 2550 x 3260
Please contact Tobias Ebert for further information.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Technical data:
Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
Gross vehicle weight: 11,900 kg
Payload: approx. 9,100 kg
Wheelbase: 990 mm
Tyres: 235/75 R17.5 inches
Loading height: approx. 920 mm
Drawbar length: approx. 1800 mm
Coupling height: approx. 750-1000 mm
Ramp angle: approx. 16°
Plank length: approx. 2600 mm
Plank width: approx. 540 mm
3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor
7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame
Standard equipment:
Pgodpfx Aoyfvg Aedhjg
Axles: Axles from renowned manufacturers
Suspension: Low-maintenance parabolic suspension with load compensation
Tyres: Manufacturer’s tyres of choice on steel rims
Braking system: ABS braking system per ECE directive, with ALB function
ABS plug connection ISO 7638
Spindle parking brake
2 interchangeable coupling heads (red/yellow) ISO 1728
Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank
Electrics: 24V lighting system with multifunction rear lights and LED side marker lights
15-pin connector for lighting
Frame: Heavy-duty, welded and hot-dip galvanised frame
Tapered rear end, 12° incline
Floor: 40 mm softwood planks
Side panels: Anodised aluminium side panels, laterally foldable and removable
Corner stanchions, galvanised, insertable front and rear
Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable
Ramp lifters: 1 gas strut per ramp
Ramp lock at rear stanchion
Ramp coating: galvanised grating
Supports: Reinforced 12 t gearbox support winch with load and fast gear
2 telescopic folding supports at left and right rear of vehicle
Features: Steel mudguards with antispray mats
Side underrun protection up to the 1st axle, foldable
2 wheel chocks with holder
Contour marking at side and rear
Space for two-line licence plate on the left ramp
A leasing or financing offer is available on request.
Mr. Seidel (Tel.) will be happy to assist you.
Further information is available on our homepage.
... Subject to errors, changes, and prior sale!!!
= Additional information =
GVW: 11,900 kg
External dimensions: 0 x 2550 x 3260
Please contact Tobias Ebert for further information.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2007
Send forespørsel
Telefon & Faks
+49 6652 ... annonser
Annonsen din har blitt slettet
Det har oppstått en feil






