Semitilhenger med walking floorSTAS
13.50 bioSTAR mit VBK E-Powerplans 93m³
Semitilhenger med walking floor
STAS
13.50 bioSTAR mit VBK E-Powerplans 93m³
Tilstand
Ny
Plassering
Korschenbroich-Glehn 

Grunnleggende data
Pris og beliggenhet
- Selgers plassering:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Tyskland

Ring
Tekniske detaljer
Dimensjoner og vekt
Lasteromsvolum:
93 m³
Lasteromslengde:
13 535 mm
Lasteplassbredde:
2 480 mm
Lasteromshøyde:
2 650 mm
Aksler og hjul
Akselkonfigurasjon:
3 aksler
Detaljer om tilbudet
- Annonse-ID:
- A211-98-535
- Oppdatering:
- sist oppdatert 10.02.2026
Beskrivelse
Chassis
Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and
strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg)
Axles and suspension "Disc brake 22.5"
Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable)
Tires and wheels
6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120
Seatposts
mechanical support winches with two speeds, 2x 20 ton support load with swivel foot,
Itjdpfjyh S Aisx Al Iop
Braking system
according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system,
electrical system
according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection
Structure/trough "structure fully welded inside"
reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn
Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load
approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards
Hydraulic system "Cargo - Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses
Accessories
6 PV
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and
strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg)
Axles and suspension "Disc brake 22.5"
Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable)
Tires and wheels
6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120
Seatposts
mechanical support winches with two speeds, 2x 20 ton support load with swivel foot,
Itjdpfjyh S Aisx Al Iop
Braking system
according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system,
electrical system
according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection
Structure/trough "structure fully welded inside"
reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn
Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load
approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards
Hydraulic system "Cargo - Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses
Accessories
6 PV
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2002
18 Annonser på nett
Send forespørsel
Telefon & Faks
+49 2182 ... annonser
Disse annonsene kan også være av interesse for deg.
Vellykket
Meldingen din er sendt.
Annonse
Bottrop
998 km
Standard trekkvogn
SCANIAR 580 V8 SZM TOPLINE mit Hydrl. Pumpe 6x4
SCANIAR 580 V8 SZM TOPLINE mit Hydrl. Pumpe 6x4
Vellykket
Meldingen din er sendt.
Annonse
Jestetten
1 427 km
2019 MAN TGX 18.500 4x2 BLS
MANTGX 18.500 4x2 Kipphydraulik
MANTGX 18.500 4x2 Kipphydraulik
Vellykket
Meldingen din er sendt.
Annonse
Weilerswist
1 087 km
Flytende gulv
Knapen
Knapen
Vellykket
Meldingen din er sendt.
Annonse
Ennigerloh
963 km
Lastebil med spesialtilpasset påbygg
Mercedes-BenzActros 2553L Schubboden Komplett möglich | Hydrodrive 4x4x2
Mercedes-BenzActros 2553L Schubboden Komplett möglich | Hydrodrive 4x4x2
Vellykket
Meldingen din er sendt.
Annonse
Jestetten
1 427 km
2016 MAN TGS 35.440 8x4H*6 Spitzer GHH
MANTGS 35.440 8X4H-6 Spitzer GHH
MANTGS 35.440 8X4H-6 Spitzer GHH
Vellykket
Meldingen din er sendt.
Annonse
Lübbecke
907 km
Wielton 55 kubikk aluminiums kornsemihenger
Wielton55 Kubik Alumulde
Wielton55 Kubik Alumulde
Vellykket
Meldingen din er sendt.
Annonse
Crailsheim
1 266 km
Standard trekkvogn
Mercedes-BenzActros 1853 LS 4x2 ***Top Ausstattung,***
Mercedes-BenzActros 1853 LS 4x2 ***Top Ausstattung,***
Vellykket
Meldingen din er sendt.
Annonse
Datteln
985 km
Høy tak varebil
MERCEDES-BENZSprinter 314/316 CDI Maxi*AHK=3.500Kg*Garantie*
MERCEDES-BENZSprinter 314/316 CDI Maxi*AHK=3.500Kg*Garantie*
Vellykket
Meldingen din er sendt.
Annonse
Ennigerloh
963 km
Semitrailer
KrakerCF-Z Schubboden Liftachse SAF Achsen
KrakerCF-Z Schubboden Liftachse SAF Achsen
Vellykket
Meldingen din er sendt.
Annonse
Ennigerloh
963 km
Standard trekkvogn
Mercedes-Benz1843 Topzustand einsatzbereit, Motor nur 150 tkm
Mercedes-Benz1843 Topzustand einsatzbereit, Motor nur 150 tkm
Annonsen din har blitt slettet
Det har oppstått en feil

















































































































































































