Lavtlaster tilhenger
MAX TRAILER 300
Lavtlaster tilhenger
MAX TRAILER 300
fast pris pluss MVA
€ 38 600
(€ 46 320 brutto)
Tilstand
Ny
Plassering
Marz 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 38 600
(€ 46 320 brutto)
- Selgers plassering:
- Bundesstr. 9, 7221 Marz, Østerrike

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 16 390 kg
- Totalvekt:
- 21 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Total bredde:
- 2 480 mm
- Total høyde:
- 860 mm
- Utstyr:
- ABS
Detaljer om tilbudet
- Annonse-ID:
- A213-65-452
- Referansenummer:
- MAX300-2A
- Oppdatering:
- sist oppdatert 03.03.2026
Beskrivelse
MAX Trailer 300 NEW | 7.0 m Load Area | 16.4 t Payload | Ramps | from €38,600
New vehicle – individually configurable to your application.
Compact and robust low-loader trailer for the safe transport of machinery, equipment, and vehicles.
Designed for high payload, easy handling, and cost-effective use in daily operations.
Highlights
• Approx. 16,390 kg payload
• 7,000 mm load area length
• Rear bevel for easy driving on
• Manually adjustable aluminum ramps
• Ramp load capacity up to 24,000 kg per pair
• BPW axles with air suspension
• EBS braking system
• Compact dimensions – ideal for construction sites & service operations
Technical Data
• Gross weight: 21,000 kg
• Unladen weight approx.: 4,610 kg (±3%)
• Payload approx.: 16,390 kg
Bodpfoypa Apex Afrjcw
• Load area length: 7,000 mm
• Overall width: 2,480 mm
• Loading height at max. load: approx. 860 mm
• Coupling heights: 700 / 775 / 850 mm
• Max. speed: 80 km/h
Standard Equipment
• Hardwood loading floor (approx. 38 mm)
• Tread plate covering over axles
• Lashing points up to LC 5,000 daN and flush-mounted lashing rings in the frame
• Cut-outs in the outer frame for tie-down straps
• BPW axles, air-suspended, drum brake with lift/lower function
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
• Tire pressure monitoring system TPMS (ECE R141)
Included options / accessories
• Drawbar approx. 1,750 mm with Ø 50 mm towing eye
• Galvanized steel front wall approx. 400 mm
• Spare wheel with holder on drawbar
• Mechanical support leg at front
• Galvanized folding supports under the rear slope
• European rear reflective plates
• White reflective tape on sides and rear
• Rotating beacon holder at rear
• Holders for warning signs including socket
• Mud flaps with MAX logo
• Additional license plate holder rear right
• Manual & documentation on USB stick
Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Actual equipment may vary depending on configuration.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
New vehicle – individually configurable to your application.
Compact and robust low-loader trailer for the safe transport of machinery, equipment, and vehicles.
Designed for high payload, easy handling, and cost-effective use in daily operations.
Highlights
• Approx. 16,390 kg payload
• 7,000 mm load area length
• Rear bevel for easy driving on
• Manually adjustable aluminum ramps
• Ramp load capacity up to 24,000 kg per pair
• BPW axles with air suspension
• EBS braking system
• Compact dimensions – ideal for construction sites & service operations
Technical Data
• Gross weight: 21,000 kg
• Unladen weight approx.: 4,610 kg (±3%)
• Payload approx.: 16,390 kg
Bodpfoypa Apex Afrjcw
• Load area length: 7,000 mm
• Overall width: 2,480 mm
• Loading height at max. load: approx. 860 mm
• Coupling heights: 700 / 775 / 850 mm
• Max. speed: 80 km/h
Standard Equipment
• Hardwood loading floor (approx. 38 mm)
• Tread plate covering over axles
• Lashing points up to LC 5,000 daN and flush-mounted lashing rings in the frame
• Cut-outs in the outer frame for tie-down straps
• BPW axles, air-suspended, drum brake with lift/lower function
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
• Tire pressure monitoring system TPMS (ECE R141)
Included options / accessories
• Drawbar approx. 1,750 mm with Ø 50 mm towing eye
• Galvanized steel front wall approx. 400 mm
• Spare wheel with holder on drawbar
• Mechanical support leg at front
• Galvanized folding supports under the rear slope
• European rear reflective plates
• White reflective tape on sides and rear
• Rotating beacon holder at rear
• Holders for warning signs including socket
• Mud flaps with MAX logo
• Additional license plate holder rear right
• Manual & documentation on USB stick
Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Actual equipment may vary depending on configuration.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Send forespørsel
Telefon & Faks
+43 5338 ... annonser
Annonsen din har blitt slettet
Det har oppstått en feil








