Tresidet tipphengerMEILLER
MZDA 18.23, linke SW abklappbar, Rollplane
Tresidet tipphenger
MEILLER
MZDA 18.23, linke SW abklappbar, Rollplane
Fast pris pluss MVA
31 891 €
(37 950 € brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Grunnleggende data
Pris og beliggenhet
Fast pris pluss MVA
31 891 €
(37 950 € brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 13 200 kg
- Totalvekt:
- 18 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 4 900 mm
- Lasteplassbredde:
- 2 380 mm
- Lasteromshøyde:
- 900 mm
Detaljer om tilbudet
- Annonse-ID:
- A221-45-767
- Referansenummer:
- 6294
- Oppdatering:
- sist oppdatert 18.06.2026
Beskrivelse
Brakes:
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums
----Axles:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Drawbar / Flange coupling:
* Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle)
----Electrical system / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pole electrical connector
* 5-chamber tail lights with protective cover
----General components:
* Aluminum air reservoir
* Welded box-type drawbar
* Support jack at the front
* Underrun protection at the rear
* Closed plastic individual fenders
* Access ladder on the front left side, on the front panel
----Tipping body:
* Steel 3-sided tipping body with M-Jet sideboards
* Front panel made of 3 mm STEELECT 240 steel
* Side walls with sturdy, continuous top rail inclined inwards
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls – without center rail
* Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall
* Left side wall pivots via manual central locking and can be folded down with sideboard spring lift
* 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate
* Manual metering device via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roller cover:
* Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel
----Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of the sideboards in RAL 9006 white aluminum
----Information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
Lodjzd I Diepfx Abuehh
* Available from approximately week 37/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums
----Axles:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Drawbar / Flange coupling:
* Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle)
----Electrical system / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pole electrical connector
* 5-chamber tail lights with protective cover
----General components:
* Aluminum air reservoir
* Welded box-type drawbar
* Support jack at the front
* Underrun protection at the rear
* Closed plastic individual fenders
* Access ladder on the front left side, on the front panel
----Tipping body:
* Steel 3-sided tipping body with M-Jet sideboards
* Front panel made of 3 mm STEELECT 240 steel
* Side walls with sturdy, continuous top rail inclined inwards
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls – without center rail
* Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall
* Left side wall pivots via manual central locking and can be folded down with sideboard spring lift
* 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate
* Manual metering device via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roller cover:
* Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel
----Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of the sideboards in RAL 9006 white aluminum
----Information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
Lodjzd I Diepfx Abuehh
* Available from approximately week 37/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
169 Annonser på nett
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Annonsen din har blitt slettet
Det har oppstått en feil


































