Silo semitrailer

KEMPF Schleusenkipper, Rüttler, ca. 58,7 cbm, Lift

In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale:

Kempf, approx. 58.7 cbm, tipper with slide gate
(Vehicle 859)

First registration: 06.11.2024
Permissible gross vehicle weight: 36,000 kg
Unladen weight: 7,340 kg
Payload: 28,660 kg
Overall length: 11,700 mm
Overall width: 2,550 mm
Overall height: 4,000 mm
Internal length: approx. 10,500 mm
Internal width: approx. 2,430 mm
Internal height: approx. 2,300 mm
Loading volume: approx. 58.7 cbm
Overall height to loading edge when loaded: approx. 3,810 mm
Interior lighting on the front wall
Front wall at a 20-degree angle, made of 5 mm thick aluminum, and straight rear wall, side walls approx. 2.5 mm side wall profiles
Floor: 7 mm thick
Air vibrator, located at the front, covering approx. 1/3 of the loading area, at the rear left, near the lamp holders
Operated via a switch
TÜV (technical inspection): 11/2026, SP (safety inspection): 05/2027
All components attached to the frame are hot-dip galvanized
Roll cover, platform
Combination tailgate with swing gate + portal doors, portal doors 1/3 and 2/3 with viewing window and rubber seal, and grain slide
Approx. 400 x 400 mm
1 dust bag
Partition with 3 sliding partitions, pivoting towards the rear and lockable from the bottom left, 6 locking positions for the partitions
Locking positions at approx. 1/5, 1/4, 3/4, 1/2, and 2/3 of the loading area
Slide gate trough in the rear wall
3 aluminum tension bars for the cover
Kodpfxjzfdlfe Ak Djdn
Hooks for towing rod/cover
High-performance bevel gear slide gate Kempf 400, throughput rate approx. 30-40 m3/h, 4 conveying hoses for the slide gate, approx. 5,000 mm long and 3" TW coupling, 4" cyclone
H2O tank approx. 30 L
2 x LED reversing lights
Fold-up underrun protection
2 x storage box, driver's side, center
1 pair of folding supports
2 x chock
Load pressure gauge
Storage compartments for hoses, left and right, above the axles, along the entire length
1 lift
BPW turntable
Tire pressure monitoring system
Tires: 385/65R22.5, 1) approx. 80/70%, 2) approx. 80/70%, 3) approx. 70/50%
PVC half-shell fenders
2 x LED work lights mounted on the folding supports
Tilting cylinder: Penta 190-250 bar
Lightly used

Price: €80,000.00 (net)

All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.