AnnenHOLDER
M 480 FH / HH & FZ Leistungshydraulik Klima
Annen
HOLDER
M 480 FH / HH & FZ Leistungshydraulik Klima
Fast pris pluss MVA
25 202 €
(29 990 € brutto)
Produksjonsår
2013
Tilstand
Brukt
Plassering
Rengersbrunn-Fellen 

Pris og beliggenhet
Fast pris pluss MVA
25 202 €
(29 990 € brutto)
- Selgers plassering:
- Barbarossastr. 12, 97778 Rengersbrunn-Fellen, Tyskland

Ring
Tekniske detaljer
- Effekt:
- 57 kW (77,50 hk)
- Utstyr:
- aircondition, firehjulsdrift, førerhus, frontløft
Detaljer om tilbudet
- Annonse-ID:
- A223-16-967
- Oppdatering:
- sist oppdatert 21.07.2026
Beskrivelse
Holder M 480 / C 480 4x4, single owner, used primarily for municipal tasks with limited winter service.
3-point front hydraulics with level adjustment, side shift, and rotating front PTO shaft, 1000 rpm. Rear hydraulics, 3-point hitch, aluminum flatbed, hydraulically tilting. Trailer hitch, work hydraulics.
Additional high-performance hydraulics with a gear pump for mounting front or rear implements with high oil demand. Circuit 1 and 2 can be adjusted steplessly. Circuit 1: 0-40 l/min, Circuit 2: 0-75 l/min at 200 bar.
4 driving modes: Fast up to 40 km/h, Slow up to 20 km/h, PTO, Manual drive.
Deutz 4-cylinder turbo diesel engine, 2.7 L displacement, hydrostatic drive by Rexroth with 4 wheel motors.
Tires approximately 90% tread, wide tires with deep treads, air conditioning.
Vehicle has been regularly maintained, last service at 3000 operating hours. Service booklet with all entries available, along with vehicle documents.
Vehicle is in good condition, almost rust-free, and has seen limited winter service.
Podpfx Akozlb Sio Dogr
4 double-acting control valves, leak-off line, pressure relief, work lights front and rear.
Unladen weight approx. 2250 kg, maximum speed 40 km/h, filled with biodegradable hydraulic oil.
Single owner.
Maintenance has always been carried out regularly and is documented.
Articulated joint newly fitted with bearings.
Both steering cylinders replaced.
2 wheel motors replaced. Biodegradable hydraulic oil replaced.
Last service at 3000 operating hours in March 2025.
Maintenance performed:
July 2013 at 60 hours
January 2014 at 225 hours
March 2015 at 500 hours
October 2016 at 900 hours
July 2017 at 922 hours
November 2018 at 1330 hours
April 2019 at 1565 hours
March 2021 at 2000 hours
March 2022 at 2300 hours
April 2023 at 2751 hours, including timing belt replacement, oil pump and turbocharger replaced, control piston for oil heater replaced.
April 2024 at 2785 hours
March 2025 at 3000 hours, both steering cylinders replaced, bearings for articulated joint replaced.
VAT can be shown: 19%
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
3-point front hydraulics with level adjustment, side shift, and rotating front PTO shaft, 1000 rpm. Rear hydraulics, 3-point hitch, aluminum flatbed, hydraulically tilting. Trailer hitch, work hydraulics.
Additional high-performance hydraulics with a gear pump for mounting front or rear implements with high oil demand. Circuit 1 and 2 can be adjusted steplessly. Circuit 1: 0-40 l/min, Circuit 2: 0-75 l/min at 200 bar.
4 driving modes: Fast up to 40 km/h, Slow up to 20 km/h, PTO, Manual drive.
Deutz 4-cylinder turbo diesel engine, 2.7 L displacement, hydrostatic drive by Rexroth with 4 wheel motors.
Tires approximately 90% tread, wide tires with deep treads, air conditioning.
Vehicle has been regularly maintained, last service at 3000 operating hours. Service booklet with all entries available, along with vehicle documents.
Vehicle is in good condition, almost rust-free, and has seen limited winter service.
Podpfx Akozlb Sio Dogr
4 double-acting control valves, leak-off line, pressure relief, work lights front and rear.
Unladen weight approx. 2250 kg, maximum speed 40 km/h, filled with biodegradable hydraulic oil.
Single owner.
Maintenance has always been carried out regularly and is documented.
Articulated joint newly fitted with bearings.
Both steering cylinders replaced.
2 wheel motors replaced. Biodegradable hydraulic oil replaced.
Last service at 3000 operating hours in March 2025.
Maintenance performed:
July 2013 at 60 hours
January 2014 at 225 hours
March 2015 at 500 hours
October 2016 at 900 hours
July 2017 at 922 hours
November 2018 at 1330 hours
April 2019 at 1565 hours
March 2021 at 2000 hours
March 2022 at 2300 hours
April 2023 at 2751 hours, including timing belt replacement, oil pump and turbocharger replaced, control piston for oil heater replaced.
April 2024 at 2785 hours
March 2025 at 3000 hours, both steering cylinders replaced, bearings for articulated joint replaced.
VAT can be shown: 19%
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2015
56 Annonser på nett
Send forespørsel
Telefon & Faks
+49 9356 ... annonser
Annonsen din har blitt slettet
Det har oppstått en feil


















































