Åpen semitrailer med presenning

KRONE SD 27 ProfiLiner*LiftA*Ladebü*

Distance from kingpin to the center of the support device: 2,267 mm
Saddle height unladen: 1,150 mm
Double T-shaped longitudinal and center beams as well as outer frame with crossbeams and outriggers, welded together
adjustable every 100 mm
Multilock outer frame,
universal load securing, front height: 125 mm (incl. floor and saddle plate)
2" kingpin (corner dimension: 2,040 mm)
for cargo area length: 13,620 mm i.w.
for cargo area width: 2,480 mm i.w.
3 axles, each with a load capacity of 9,000 kg
Aggregate distance: 7,480 mm
Wheelbase: 1,310 / 1,310 mm
KRONE axles with air suspension and disc brake, offset 120
Brake disc with 430 mm diameter
with lifting and lowering device, incl. automatic
driving height reset
load-dependent, fully automatic electronic
lift axle control for 1st axle
manual function on the control console for forced lifting
(= starting aid acc. to Directive 97/27/EC) and forced lowering
Preparation of the lift/trailing axle(s) for operation
from the tractor unit (without tractor unit installation)
Tire size: 6 x 385/65 R 22.5
Tread depth
Tires L/R
6/6 mm
8/10mm
8/11mm
Steel corner brackets at the rear outside as a trapezoidal box
Delta rubber frame profile at the rear across the rear frame
1 toolbox, plastic, maximum surface load 50 kg,
Hsdpfxozl Nzxo Af Ujfi
approx. 650x490x450 mm on the outside, in front of the axle unit on the left
Pallet stop on the side rail, left, welded,
approx. 30 mm high
Cargo area width in the area of the pallet stop
reduced to: 2,460 mm i.w.
Loading platform, manufacturer: MBB, can be driven under, load capacity: 2000 kg
Load distance: 750 mm
Platform size: approx. 2,400 x 1,710 mm (width x height)
with double roll-off protection
Foot operation
Power supply for loading platform operation via the tractor unit
via a 2-pole round contact socket (Rema)
Warning flashing lights on the loading platform
Type: BO 13620 B
30 mm thick, waterproof panel floor, cut edges
sealed all around, continuous, waterproof gluing
between chassis and floor panel with a permanently elastic high-performance adhesive. Strength according to DIN 283, for floor loads up to max. 7,000 kg forklift axle load.

Custom license plates and insurance are available upon request for an additional charge! In export business, we can carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.

For further information, please contact Mr. Lübberding on mobile/WhatsApp or Mr. Rohe!

Always make an appointment for inspection/test drive! Just drop by. We look forward to your visit.
---Disclaimer: The information provided on the Internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors / errors. Subject to prior sale!

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.