Tippsemi

STAS ferroSTAR 54,9 cbm

ferroSTAR 54.9 cbm
iron gray
Chassis type: Z-chassis
Axle distance (mm): 1310-1310
Fifth wheel height (mm): 1150
Chassis width (mm): 1400
Loading width (mm): 2325
Technically permissible total weight: 39 = 12 + 9 + 9 + 9
Interior height front (mm) (IHF): 2285
Interior height rear (mm) (IHB): 2285
Volume (m³): 54.9
Overall width (mm): 2550
Wheelbase (mm) (WB): 6600
Overall length (mm): 11520.836

Chassis material: Steel
Tire dimension: 385/65R22.5
Loading length (mm): 10149
Axle manufacturer: SAF
Axle version: Intra
Brake version: Disc brake
Brake type: SAF - SBS 2220
Offset (ET): 120
Option 1: Axle with lift axle and starting aid
Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times
Air suspension: ECAS with lifting and lowering valve
Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis
Coupling head: Pneumatic, European Palm coupling
Tire brand: Manufacturer's choice
Rims: Steel
Tire type: Regional
Wheel nuts: Open
Wheel nut caps: Plastic
Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair
Operation of underride protection: Manual
Position of Smartboard: On the left side, in the direction of travel, in front of the axles
Toolbox: On the left side, in the direction of travel, in front of the axles
Spare wheel holder: On the right side, in the direction of travel, below the chassis
Number of splash guards on the fender: 2 pieces
Type of splash guard on the fender: Clear Pass
Manufacturer of lighting: Aspöck
Type of lighting: ECOLED II
Work lights (operated via switch): Included
Position of work lights (operated via switch):
2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier
Kdedpfx Aezmcn Ush Ujp
Position of work lights (operated via switch):
2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports
Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice)
Type of tilting cylinder: Hydraulic cylinder with small housing
Cylinder tilting angle: Normal
Model of tilting cylinder: Hyva - FC 169
Stroke of tilting cylinder: 7130
Hydraulic coupling: Swivel coupling
Hydraulic coupling - Size: 1
Hydraulic coupling - Gender: Female
Hydraulic coupling - Hose: 2,100 mm
Type of Smartboard: ECAS control box
Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel
Broom and shovel holder: Included
Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel
Position of broom and shovel holder: On the front wall, on the left in the direction of travel
Load manometer: Ø 63 mm - mounted on the side of the instrument panel
Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection
Mounting of splash guard for underride protection: Flexible
Plastic support wedges: With two plastic support wedges including holder
Air and electrical console: Mounted on the right in the direction of travel

Rear wall type: Swing doors
A-sign: Foldable on the rear wall, mounted on the right in the direction of travel
Floor: Made of 6 mm HB450
Position of rubber supports: Mounted below the floor

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.