Arbeidsplattform semitrailer

FAYMONVILLE MAX Trailer MAX200 Sattelanhänger Megatrailer

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list:
Complete equipment available upon request.

Loading area:
* 2 pairs of lashing rings (LC 5,000 daN)
* 1 pair of lashing rings (LC 10,000 daN)
* 6 pairs of lashing rings (LC 5,000 daN) that fold outward
* 2 pairs of lashing rings (LC 10,000 daN) that fold outward
* Recesses in the outer frame of the loading area for attaching tension straps (LC 2,000 daN)

Axles:
* BPW axles with disc brakes (approx. 377 mm)
* Air suspension with lifting/lowering function (ET 120)

Tires:
Gbodpfxszqiigo Ad Ret
* 435/50 R 19.5 - Manufacturer of our choice

Kingpin:
* JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load)

Braking system:
* Complies with EU regulations, with EBS-E (2S2M)

Electrical system:
* Complies with EU regulations

Lighting:
* 24-volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pole connectors
* Complies with ISO. 24N ISO-1185 24S ISO-3731
* 15-pole ISO-12098

Steel construction:
* Made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa)

Paint finish:
* First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red
* Rear section metallic and painted in RAL 9010 (pure white)
* Rims in silver.

Including the following additional equipment:
* Yellow-red air couplings on the galvanized front connection bar
* 2-inch kingpin
* A galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high (± 35 kg)
* Yellow reflector tape according to EU regulations, laterally and at the rear of the trailer
* European reflector plates (red-yellow) at the rear of the trailer
* Loading area with approx. 38 mm thick hardwood flooring (+ 320 kg)
* 10 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the loading area (± 30 kg)
* 1 spare wheel holder under the loading area on the right side in the direction of travel.
* A mudflap at the rear of the trailer.
* Manual and description on a USB stick.
* A bracket for a rotating beacon at the rear of the trailer.
* On the drawbar and the rear panel, left and right, a bracket for the warning panels including a connector.
* On the central beam, a painted layer of sand as an anti-slip protection.
* An INOX toolbox transversely under the loading area, approx. 1,000 x 400 x 2,500 mm (± 135 kg)
* 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container. (± 90 kg)
* 4 pairs of WADER container locking devices (± 60 kg)
* 10 pairs of galvanized removable stakes, approx. 100 x 50 mm, approx. 1,000 mm high. (± 220 kg)
* 3 pairs of stake pocket rails, mounted transversely in the loading area, for removable stakes approx. 100 x 50 mm (± 95 kg)
* Storage for a maximum of 9 pairs of removable stakes, approx. 100 x 50 mm, attached to the front bulkhead on the inside. (± 34 kg)
* A tool box made of HDPE, approx. 620 x 360 x 610 mm, under the loading area on the left side in the direction of travel. (± 36 kg)
* Plug-in approx. 500mm U-shaped mounting rails for aluminum ramp extensions at the rear of the vehicle
* Lift axle on the front axle with control

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.