Tømmerhenger

DOLL Kurzholzanhänger A2G-10 Spezialanhänger

DOLL - 2-Axle Short Timber Trailer in "Bogie" Design, Type A2G-10L500 (A131)

Technical Data:
Dimensions:
Trailer overall length: 8,511 mm (with drawbar length 1,900 mm)
Loading length: 6,611 mm
Front overhang: 760 mm
Rear overhang: 856 mm
Vehicle width: 2,550 mm
Wheelbase: 4,995 mm
Loading height, top edge of frame, loaded: 1,187 mm (with tire size 275/70 R 22.5)
Overall height: max. 4,000 mm
Weights:
Permissible total weight: 18,000 kg
Axle load (2 x 9t): 18,000 kg (technical 24,000 kg)
Unladen weight approx.: 3,350 kg (without bogie and stakes)
Payload approx.: 14,650 kg

Standard equipment: A2G DOLL - 2-axle short timber trailer in "bogie" design - straight top chord
Stable welded construction with 2 longitudinal beams and a straight top chord.
- Bogie with ball bearing swivel
- 1 piece chock with bracket
- Lateral impact protection according to ECE?R 73
Rear underrun protection:
Aluminum underrun protection, according to ECE?R 58
All lighting and license plate holder protected and integrated, according to ECE?R 48
Wheel covers: Full plastic fenders above the wheels,
mounted at the front on the bogie and at the rear on the main frame,
Hjdpfx Akezq Hbgs Dsr
with DOLL splash guards behind the axles.

Frame cover:
Continuous aluminum duet sheet cover (3/5 mm) screwed between the top chords.
Drawbar GZY27:
Drawbar with silent block bearings and drawbar support, type GZY 27
Drawbar eye:
Length:
D-value:
Maximum front axle load:
Maximum total weight: Ø 50 mm (heavy-duty ECE)
1,900 mm
125 kN
10 t
27 t

Connection cable to the truck: Laid along the drawbar (air, light, ABS).
Cable routing: Protected routing of brake and electrical cables on the main frame.
Clamp bracket: Inclined clamp bracket at the front, reinforced.
Splash guard: Continuous splash guard at the end of the vehicle, pivoting, with ?DOLL? logo.

Chassis / Frame: 12 t
Axle: 2 single axles, manufacturer BPW, 12 t with drum brakes, both axles with ABS and automatic slack adjusters, including safety cables. Suspension type SL, with 2 x 43mm trailing arm spring.
Air suspension: Air suspension without lifting and lowering.
Weight indicator without Smartboard: EBS-E weight indicator for trailers with air suspension, consisting of 2 pressure sensors for determining the axle loads. The axle loads are transmitted to the truck via CAN-BUS, for
weight display on the truck display. (Truck equipment not included in the scope of delivery!)
Braking system: Electronically controlled 2-line pneumatic braking system (EBS-E).
Brand-name manufacturer, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, operable by means of a parking release safety valve, and from the driver's cab (truck-side installation not included in the scope of delivery!)
Air tank made of aluminum.

Brake connection: 1 piece Duomatic coupling head.

Tires: Tires (85.50 kg / piece): 8 tires 275/70 R 22.5, manufacturer Continental Hybrid HS3 on steel rim 8.25 x 22.5.

Bogie / Stakes:
Bogie: 6 pieces ECCO steel bogie body with 2° stake inclination type Kombi 7 (80.0 kg),
with bracket - clamp attachment mounted on the main frame. Including 1 pair of hooks for load securing.
Stakes: ECCO aluminum stakes type ALU 7, screwable, fixed-length stake.
Basic height 2,550 mm (21.0 kg).
Maximum loading capacity per stake pair 7t.

Electrical equipment / Lighting:
Lighting system: Conventional wiring of the trailer to increase the quality standard.
- Long service life
- Insensitive to moisture and dirt
- Minimal mainten

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.