Arbeidsplattform semitrailer

KÖGEL Multi Chassis, verstärkt, Bordwände

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list:
Complete equipment available upon request.

Chassis
* Regular ladder frame in lightweight steel construction with through-running crossmembers, with chassis frame extension.
* Coupling plate approximately 8 mm thick
* with a 2-pin kingpin according to DIN 74080 / ISO 337

Suspension
* For indivisible loads, an increase in the total permissible weight is permitted.
* Axle lift mechanism on the axle
* 1 automatic axle lift control, load-dependent
* Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h
* Manufacturer of your choice: Kögel

Three-axle unit
* with disc brakes Ø 430 mm
* Embedding depth approximately 120 mm
* Air suspension with approximately 180 mm travel.

Vehicle tires
* Wheels with internal sensors according to UN ECE R141
* Tires 6x 385/65 R 22.5, AUSTONE ATH155 164K long haul

Chassis components
* Kingpin supports (manufacturer of your choice from Kögel) mechanically with leveling foot, approximately 24 t lifting capacity
* One-side operation on the right side when driving
* Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5
* consisting of 1 pair of quarter-circle fenders in front of the axles
* 1 pair of straight fenders with splash flaps between the 1st and 2nd axle
* 1 pair of quarter-circle fenders with splash flaps behind the axles
* Storage box for: 10 sideboards, folding stakes, and rear door/rear flap. Closed on all sides
* Protected against spray, also serves as a side protection device
* 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installation at the rear, 1x left and 1x right
* 1 pair of pull-out warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection
* Arrangement in the front and rear area of the vehicle

Brake / Air suspension system
* EBS system 2S/2M with stability program (includes ABS/ALB function)
* EBS plug connection ISO 7638 (without connection cables)
* Parking brake as a spring brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 plug connection
Iijdpfx Afozrkbgjtog
* Wabco EBS system
* Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving, behind the axle unit
* Driving position adjusts automatically

Floor
* Plate floor approximately 30 mm thick
* Recess pockets for square tube inserts approximately 80 x 80 mm, arrangement according to drawing J9
* 8 pieces of recess pocket strips (18 recess pockets per strip: 4 pieces each on the outside + 10 pieces in the middle)
* Body meets body strength according to EN 12642 XL (VDI 2700)
* Tested for a payload of approximately 27,000 kg

Front wall
* Storage for a maximum of 20 square tube inserts approximately 80 x 80 mm (length approximately 1,990 mm) on the inner side of the front wall
* Front wall approximately 2,000 mm high with steel corner posts, with profiled sheet steel, screwed/riveted to the frame
* 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640

Rear wall
* Hinged rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension rods and T-bar locking
* 2 folding steps on the inside. Hinged steel corner posts at the rear, at

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.