Tresidet tipphenger

MEILLER MZDA 18.22 | *NEW* | RAL 3003*Trommel*EBS

* Color of the tipping body: Ruby Red RAL 3003 (CharterWay)
* 9 tons each (technical axle load)
* Drum brake, size 420 x 180 mm, with asbestos-free brake linings and closed brake drum
* Offset ET0 (S-hub)
* Standard wheel bolts
* Electronically controlled two-circuit pneumatic brake system (EBS E+RSS)
compliant with EC, with automatic load-dependent brake valve (ALB)
Spring accumulator cylinder and two keyed coupling heads
* ABS 2S/2M (Wabco), with connecting lines
* Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for concrete mixers
* Tire size 385/65 R 22.5, profile S
* Painted steel rims
* Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141
* 1/2 shell fenders with splash guard
* Plastic fenders
* Rigid underrun protection according to ECE R-58 (R58-03)
* Floor 5 mm HBW 450 (Hardox 450 or comparable material)
* Front wall 3 mm BS 70
* Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET
* Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET
* Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET
* Oscillating and folding left side wall with spring relief
* Oscillating right side wall
* Spring relief on the left side wall
* Oscillating rear wall
* Rear wall with cam lock
* Fixed rear corner posts
* Fixed left front corner post
* 150 mm long, fixed, straight discharge chute
* Safety support for the tipping body
* Metering device using chains
* Access ladder on the left side of the front wall
* Without towing hitch
* Two keyed coupling heads with integrated line filters
* Aluminum air reservoir
* 7-pole ABS connecting cable for EBS brake system
* 1 x 15-pole front adapter according to ISO 12098
Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098
* 1 x 15-pole electrical connecting cable (Wendelflex)
* Hydraulic oil filling with HLPD-22 mineral oil
Note: not in conjunction with kit shipment
* Painting of the chassis frame (main frame, axle supports and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors)
* Color of the chassis frame: Black
* Painting of the tipping body overall in standard color
* Tipping body color
* Individual inspection (e.g. TÜV or Dekra) or COC
* Contour marking according to EC: white on the sides, yellow on the rear
* Manufacturer's certificate
* COC
Note: The COC is not yet available for all MEILLER products
Ijdpjzu D N Nofx Am Reba
* 1 year warranty period excluding the required annual inspections (UVV inspections)
* 24-volt five-chamber rear lights with integrated triangular reflectors according to ECE-R 48 incl. lamp protection
* MEILLER standard axles (SAF or BPW)
* Flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t)
in the corners of the tipping body floor
Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed.
* PREVANTEC S package consisting of oscillating and folding left side wall and flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor according to DIN EN 12640
Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed.
* Tipping body width 2,380 mm

All information without guarantee / subject to change.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.