Tresidet tipphenger

MEILLER MZDA 18.22 | *NEW* | RAL 2011*Trommel*EBS*

* Color of the tipper body: 2011 Tieforange
* 9 tons each (technical axle load)
* Drum brake, size 420 x 180 mm, with asbestos-free brake linings and a closed brake drum
* Offset ET0 (S-hub)
Ijdpfx Amszu D Rms Reba
* Standard wheel bolts
* Electronically controlled two-circuit compressed air brake system (EBS E+RSS) according to EC with automatic load-dependent braking valve (ALB), spring brake cylinder, and two keyed coupling heads
* ABS 2S/2M (Wabco), with connection lines
* Electronically controlled air suspension (ECAS) with automatic quick lowering during the tipping process to increase stability; can be deactivated for concrete mixers
* Tires 385/65 R 22.5, profile S
* Painted steel rims
* Tire pressure monitoring system (TPMS) according to EU Regulation UN ECE-R 141
* 1/2 shell fenders with splash protection mat
* Plastic fenders
* Fixed underrun protection according to ECE R-58 (R58-03)
* Floor 5 mm HBW 450 (Hardox 450 or comparable material)
* Front wall 3 mm BS 70
* Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET
* Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET
* Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET
* Pivoting and folding left side wall with spring relief
* Pivoting right side wall
* Spring relief on the left side wall
* Pivoting rear wall
* Rear wall with cam lock
* Fixed rear corner posts
* Fixed left front corner post
* 150 mm long, fixed, straight discharge chute
* Safety support for the tipper body
* Dosing device by means of chains
* Access ladder on the left side of the front wall
* Without trailer coupling
* Two keyed coupling heads with integrated line filters
* Aluminum air reservoir
* 7-pole ABS connection cable for EBS brake system
* 1 x 15-pole front adapter according to ISO 12098
Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098
* 1 x 15-pole electrical connection cable (spiral flexible cable)
* Hydraulic oil filling with HLPD-22 mineral oil
Note: Not in conjunction with kit delivery
* Painting of the chassis frame (main frame, axle supports, and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors)
* Color of chassis frame: Black
* Painting of the entire tipper body in a standard color
* Tipper body color
* Individual approval (e.g., TÜV or Dekra) or Certificate of Conformity (COC)
* Contour marking according to EC: white on the sides, yellow on the rear
* Manufacturer's certificate
* COC
Note: The COC is not yet available for all MEILLER products
* 1-year warranty period, excluding annual inspections (UVV tests)
* 24-volt five-chamber lights with integrated triangular reflectors according to ECE-R 48, incl. lamp protection
* MEILLER standard axles (SAF or BPW)
* Flush-mounted, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor
Note: For subsequently installed access platforms, the requirements according to Annex 2 of the DGUV Regulation 70 # Vehicles must be observed
* PREVANTEC S package consisting of a pivoting and folding left side wall and flush-mounted, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor according to DIN EN 12640
Note: For subsequently installed access platforms, the requirements according to Annex 2 of the DGUV Regulati

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.