Åpen semitrailer med presenning

KRONE Profi Liner SDP 27 eLB50-CS*LiftA*Edscha*PalKa

maximum permissible saddle load for registration/operation: 12,000 kg
maximum permissible axle load for registration/operation: 24,000 kg
maximum permissible gross weight for registration/operation: 36,000 kg
technically permissible maximum saddle load: 12,000 kg
technically permissible maximum axle load: 27,000 kg
technically permissible maximum gross weight: 39,000 kg
suitable for tractor unit according to ISO 1726:
distance from kingpin to center of support device only 2080 mm
instead of 2270 mm, DIN ISO 1726 is limited! reduced
maneuverability of the tractor unit
saddle height unladen: 1,145 mm
Multilock outer frame, universal load securing option every 100 mm
front overall height: 125 mm (incl. floor and saddle plate)
2" kingpin (corner dimension: 2,040 mm)
for cargo box length: 13,620 mm i.d.
for cargo box width 2,480 mm i.d.
3 axles each with 9,000 kg load capacity
wheelbase: 1,310/1,310 mm
KRONE axles with air suspension and disc brake, ET 120
brake disc with 430 mm diameter
with lifting and lowering device, incl. automatic
driving height adjustment depending on load, fully automatic electronic
Itodpfx Aszvldqshusk
lift axle control for 1st axle
Type: AB 13620 AP - Dimensions 13,620 mm i.d. x width i.d. see
LM universal outer beams, continuous, for mounting
sliding tarpaulin and sliding battens
basic sliding tarpaulin with plastic joints, manufacturer: Edscha
height i.d. lower edge of outer beam, front side: 2,600 mm
height i.d. lower edge of outer beam, rear side: 2,700 mm
through-loading height in rear portal: 2,700 mm
unladen vehicle overall height at the highest point approx. 4005 mm
(with the above-mentioned unladen saddle height)
rubber seal on outer beam: grey
sliding tarpaulin cannot be moved from front to back
diagonal straps integrated into roof tarpaulin
LM insert slats
LM insert slats with V-groove steel front wall, continuous, with stable corner posts,
laterally limited through-loading
front wall reinforced inside with screen-printed panel
holder for tarpaulin cord on front wall
release device for side tarpaulin on front wall
steel container door with screwed-on rear frame,
internal rotary rod locks and hinges,
roof crossbar can be folded up and moved with the tarpaulin
through-loading width in the rear 2,480 mm i.d.
rear wall in painted design
door lock with one-hand operation
double rotary rod lock per container door
tarpaulin tensioning device on the rear frame by means of ratchet
attachment for sliding tarpaulin rod on the rear wall
certificate for load securing according to EN 12642 Code XL
certificate for load securing for beverage transport (VDI 2700
BI. 12)
tread depths
8/10 mm
12/9 mm
5/11 mm
On request, customs license plates and insurance are available for an extra charge! In export business, we can carry out the export declaration and approval for you against reimbursement of costs.
When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.
For further information, please contact Mr. Lübberding on mobile/WhatsApp.
Always make an appointment for inspection/test drive!
See also.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.