Utskiftbar påbygg med boksstrukturKerex
Fifty Box
Utskiftbar påbygg med boksstruktur
Kerex
Fifty Box
VB pluss MVA
4 443 €
(5 376 € brutto)
Tilstand
Brukt
(fullt funksjonell)
Plassering
Praha 

Grunnleggende data
- Betegnelse:
- Utskiftbar påbygg med boksstruktur
- Produsent:
- Kerex
- Modell:
- Fifty Box
- Tilstand:
- brukt
- Funksjonalitet:
- fullt funksjonell
Pris og beliggenhet
VB pluss MVA
4 443 €
(5 376 € brutto)
- Plassering:
- Praha, Tsjekkia

Tekniske detaljer
Dimensjoner og vekt
Totalvekt:
2 700 kg
Egenvekt:
1 500 kg
Maksimal lastevekt:
1 200 kg
Lasteromsvolum:
22 m³
Lasteromslengde:
3 750 mm
Lasteplassbredde:
2 550 mm
Lasteromshøyde:
2 750 mm
Flere detaljer
Farge:
hvit
Detaljer om tilbudet
- Annonse-ID:
- A233-13-801
- Oppdatering:
- sist oppdatert 10.11.2026
Beskrivelse
Floor unit
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.
Fodpj Aitplofx Ad Njgi
Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.
Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.
Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Marketing description according to the proposal
Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages
The container is currently in the Czech Republic (Prague).
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.
Fodpj Aitplofx Ad Njgi
Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.
Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.
Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Marketing description according to the proposal
Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages
The container is currently in the Czech Republic (Prague).
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Leverandøren er for øyeblikket under vurdering. Din forespørsel vil bli videresendt og kan besvares av leverandøren etter at vurderingen er fullført.
Send forespørsel
Annonsen din har blitt slettet
Det har oppstått en feil








