åpen semitrailer
Fliegl SDS 350 Mega

EXW Fast pris pluss MVA
10 500 €
(12 495 € brutto)
Tilstand
Brukt (fullt funksjonell)
Plassering
Triptis Tyskland
åpen semitrailer Fliegl SDS 350 Mega
åpen semitrailer Fliegl SDS 350 Mega
åpen semitrailer Fliegl SDS 350 Mega
åpen semitrailer Fliegl SDS 350 Mega
åpen semitrailer Fliegl SDS 350 Mega
åpen semitrailer Fliegl SDS 350 Mega
more Images
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega

Grunnleggende data

Betegnelse:
åpen semitrailer
Produsent:
Fliegl
Modell:
SDS 350 Mega
Kjøretøynummer:
WFDFLT23002024348
Tilstand:
brukt
Funksjonalitet:
fullt funksjonell

Pris og beliggenhet

EXW Fast pris pluss MVA
10 500 €
(12 495 € brutto)
Plassering:
Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Tyskland
Ring

Tekniske detaljer

Dimensjoner og vekt

Totalvekt:
39 000 kg
Egenvekt:
5 865 kg
Maksimal lastevekt:
33 135 kg
Total lengde:
13 850 mm
Total bredde:
2 550 mm
Total høyde:
1 820 mm

Aksler og hjul

Akselkonfigurasjon:
3 aksler
Fjæring:
luft
Dekkstørrelse:
435/50 R19,5"
Dekktilstand:
49 prosent

Dokumentasjon og sertifisering

Neste kontroll (TÜV):
04/2027

Flere detaljer

Første registrering:
12/2018

Detaljer om tilbudet

Annonse-ID:
A233-58-848
Referansenummer:
49397
Oppdatering:
sist oppdatert 19.11.2026

Beskrivelse

# Chassis / Frame
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
Itodpfx Aco Ak Npaeasp
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.

Tilbyder

Registrert siden: 2006

198 Annonser på nett

Ring

Send forespørsel

Landus 
Tyskland
Østerrike
Sveits
USA
Storbritannia
Frankrike
Belgia
Spania
Mexico
Italia
Nederland
Polen
Den russiske føderasjonen
Hviterussland (Belarus)
Ukraina
Estland
Tyrkia
New Zealand
Irland
Tsjekkia
Danmark
Finland
Sverige
Norge
Luxembourg
Hellas
Litauen
Latvia
Island
Portugal
Brasil
Venezuela
Argentina
Ungarn
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroatia
Bulgaria
Nord-Makedonia
Bosnia-Hercegovina
Israel
Egypt
Marokko
India
Indonesia
Sør-Korea
Japan
Thailand
Malaysia
Vietnam
Kina, Folkerepublikken
Taiwan
Iran
Bangladesh
Forespørselen kunne ikke sendes. Vennligst prøv igjen senere.

Telefon & Faks

+49 36482... annonser