Tresidet tipphengerHUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
Tresidet tipphenger
HUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
VB pluss MVA
6 150 €
(7 318 € brutto)
Produksjonsår
2026
Tilstand
Ny
Plassering
Nürnberg 

Grunnleggende data
Pris og beliggenhet
VB pluss MVA
6 150 €
(7 318 € brutto)
- Plassering:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

Ring
Tekniske detaljer
Dimensjoner og vekt
Totalvekt:
3 000 kg
Egenvekt:
940 kg
Maksimal lastevekt:
2 060 kg
Total lengde:
4 555 mm
Total bredde:
1 910 mm
Total høyde:
1 260 mm
Lasteromslengde:
3 130 mm
Lasteplassbredde:
1 740 mm
Lasteromshøyde:
400 mm
Aksler og hjul
Akselkonfigurasjon:
2 aksler
Dekkstørrelse:
195/50 R13C
Bremser
Tilhengerbrems:
tilhenger med bremser
Detaljer om tilbudet
- Annonse-ID:
- A233-68-807
- Oppdatering:
- sist oppdatert 22.11.2026
Beskrivelse
Humbaur three-way tipper with electric pump and Furmann steel sideboards, hot-dip galvanized, 40 cm high, for demanding applications.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
Knodpfx Alj Algdio Isd
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
Knodpfx Alj Algdio Isd
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2011
42 Annonser på nett
Send forespørsel
Telefon & Faks
+49 911 9... annonser
Annonsen din har blitt slettet
Det har oppstått en feil


























