Tippsemi

Fliegl DHKS 390 - 27 m³

Customized Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Further Information
Chassis, Saddle, and Tipper
Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins
Curved front end, patented
Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward.
Chocks with holder
Underrun protection, foldable
Half-shell fenders
Integrated fender holder, surface designed to repel stones
Tarpaulin rod with holder
Towing hook at the rear
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Axles in off-road design
Air suspension
1st axle: automatic lift axle, including forced lowering and starting assist
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking System
2-line compressed air braking system, color-coded lines for easy servicing
Spring-loaded parking brake
2 fail-safe coupling heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connecting cable
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lift and lower valve
Vehicle - Driving Stability System
Wheels and Tires
385/65 R22.5
Steel rims, factory silver
"TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires).
Electrical System
24 volts, multi-chamber lights, yellow LED lighting on the side
Yellow LED lighting on the side, linked to the turn signal ("flashing side lights")
2 white position lights at the front
2 white/red outline lights at the rear
2 x 7-pole fail-safe sockets at the front, without connecting cable
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection)
Actuation hydraulically via truck auxiliary drive
Body
Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall.
Greenline - conical and aerodynamic body shape
Shovel and broom holder on the outside of the front wall.
Membrane - rear wall
Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom.
Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design
Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation.
Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left
Registration country / signs
Germany
Type approval according to EG 2007/46
Body strength according to EN 12642
24/7 service hotline
prepared for single-row license plate holder
Warning sign according to ECE - 70
Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear
Painting
Frame: DB 7350 Novagrau
"10-year warranty against rust-through"
Support legs: galvanized
Credpji Ri A Iofx Afwed
Body: RAL color of your choice, solid color
Roll-over

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.