Lavbygd semitrailer

Fliegl SES 210 Schatzträger für LKW Transport

Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)*
Hjdsi Ri Hkopfx Acrou

# Low Loader Semi-Trailer Chassis

Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps.

Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye.

Spare wheel with holder mounted externally at the front on the headboard/toolbox.

Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm).

24 V electric winch with 8,165 kg pulling capacity, mounted on the gooseneck behind the toolbox. Wireless remote control, 35 m steel cable (approx. Ø10 mm), roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel.

1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck, open towards the outside. Main frame protrudes approx. 145 mm.

4 pairs of mounting positions for wheel chocks (Fliegl standard), removable wheel chocks included.

For transporting tractor units, front wheel well spacer blocks (approx. 50 mm high) included.

# Lashing Equipment

2 pairs of 2.5 t lashing rings on the gooseneck
7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side)
4 pairs of recessed 10 t lashing rings in the main longitudinal beams
1 central rear screw-type lashing point, 6.7 t (JDT)
1 additional front folding lashing ring in the low bed, 10 t

# Axle + Suspension

SAF drum brake axle
Air suspension with raise/lower valve

# Wheels and Tyres

235/75 R17.5 tyres from leading manufacturers
Twin steel wheels, factory silver finish

# Brake System

Dual-line compressed air braking system
Spring parking brake
2 non-interchangeable air couplings at front
Electronic Braking System (EBS) with front EBS socket

Note: Trailer may only be operated with towing vehicles providing full ABS functionality.

# Electrical System

24 V electrical system
LED multi-chamber rear lights
Yellow LED side marker lights
LED number plate lighting
LED front position lights
LED rear outline marker lights (white/red)
2 × 7-pin and 1 × 15-pin front sockets
LED rotating beacon with holder, activated via parking lights
Additional LED work light at rear, activated via reverse gear

# Floor

Steel chequer plate on gooseneck
Perforated steel low-loader deck with chequer plate in wheel well area
Removable steel covers above wheel arches
Perforated steel rear loading slope

# Side Walls

400 mm aluminium side boards on the gooseneck, removable, approx. 2,500 mm long
400 mm removable aluminium rear board on the gooseneck

# Loading Ramps

Pair of aluminium loading ramps, max. capacity 12,000 kg per pair, approx. 3,400 × 320 mm
Rear ramp storage compartment between the longitudinal beams

# Registration / Marking

Prepared for German registration
Single-line number plate holder
ECE R48 reflective contour markings (white sides, red rear)