Tresidet tipphengerMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Tresidet tipphenger
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
fast pris pluss MVA
€ 28 500
(€ 33 915 brutto)
Produksjonsår
2024
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 28 500
(€ 33 915 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 8 620 kg
- Totalvekt:
- 11 900 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 5 500 mm
- Lasteplassbredde:
- 2 420 mm
- Lasteromshøyde:
- 500 mm
Detaljer om tilbudet
- Annonse-ID:
- A104-27-000
- Referansenummer:
- 5892
- Oppdatering:
- sist oppdatert 13.01.2026
Beskrivelse
* KA-TA-R 11.9:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equaliser unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanised folding support legs
* Tool box made of galvanised sheet steel, mounted on the right side
* Hot-dip galvanised, bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall
* Hot-dip galvanised chassis
* 3-way tipping steel platform for pallets
* Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders
* Rear drop gate can be folded down or operated in pendulum mode via manual central locking
* Bolted, hot-dip galvanised rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of drop side extensions
* 5.5 metre-long platform
----Load Securing:
* Each corner fitted with 1 x 5 t lashing ring
* 4 x 3 t lashing rings integrated into the outer frame on each side
----Ramps:
* Rear guide rails for loading ramps
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in a shade of black
* Platform superstructure colour: RAL 9010 pure white
* Painting of the side walls and tipping platform in an RAL colour tone available at extra cost
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
Gisdpfxjl Thx Es Ab Aol
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equaliser unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanised folding support legs
* Tool box made of galvanised sheet steel, mounted on the right side
* Hot-dip galvanised, bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall
* Hot-dip galvanised chassis
* 3-way tipping steel platform for pallets
* Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders
* Rear drop gate can be folded down or operated in pendulum mode via manual central locking
* Bolted, hot-dip galvanised rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of drop side extensions
* 5.5 metre-long platform
----Load Securing:
* Each corner fitted with 1 x 5 t lashing ring
* 4 x 3 t lashing rings integrated into the outer frame on each side
----Ramps:
* Rear guide rails for loading ramps
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in a shade of black
* Platform superstructure colour: RAL 9010 pure white
* Painting of the side walls and tipping platform in an RAL colour tone available at extra cost
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
Gisdpfxjl Thx Es Ab Aol
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil




















































