Tresidet tipphenger

MÜLLER-MITTELTAL 2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe

KA-TA-R 14.4:

----Brakes:

* Wabco ABS
* Emergency release system for spring-loaded cylinders
* Drum brakes

----Axles:
* 2 x 7 t Gigant axles

----Suspension:

* Parabolic springs with tandem compensation unit

----Drawbar / Flange Drawbar Eye:

* Height-adjustable drawbar (up to 300 mm) with 40 mm flange drawbar eye

----Electrics / Lighting:

* 15-pin electrical connector
* Multi-chamber taillights
Gsdol Th Htjpfx Ad Njbw

----General Attachments:

* Jost mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of chassis
* Bolted underrun protection
* Plastic quarter mudguards
* Net hooks located at each central locking bearing and two at the front wall

----Chassis:

* Chassis made from fine-grain steel

----Tipper Body:

* Steel pallet 3-way tipper body with continuous side walls, upper internal tube reinforcement, fold-down without centre posts, with drop side spring lift assist
* Rear corner posts bolted
* Combination steel wing-door rear wall, 2-leaf, asymmetrical split, can be swung and locked up to 270°, not foldable, equipped with additional swing frame for automatic rear wall opening when tipping. Locking via galvanised rotary latch at rear and central locking. Deactivation function for the automatic rear wall operation when tipping backwards with one leaf open.
* 4 mm floor plate made of fine-grain steel
* Rear guide rail for loading ramps

----Load Securing:

* One 5 t lashing ring fitted in each corner, plus four 3 t lashing points recessed into the outer frame on each side

----Ramps:

* One pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable compartment at the rear, recessed below the loading floor in the chassis, for the ramps

----Tyres:

* Tyres 285/70 R 19.5

----Paintwork:

* Chassis, drawbar, underrun protection, rear posts, rear folding supports hot-dip galvanised
* Axles, springs, air tanks, and landing gear painted in black tone
* Drop side panels painted in RAL 9010 pure white
* Side walls paintable in any RAL colour (at extra charge)

----Info:

* Reinforced structure with load securing certificate
* Vehicle has a daily registration (unused)
* Errors and prior sale excepted

----Delivery Time:

Immediately available ex Egestorf

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.