Tilhenger med arbeidsplattformMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
Tilhenger med arbeidsplattform
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
fast pris pluss MVA
€ 33 500
(€ 39 865 brutto)
produksjonsår
2023
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 33 500
(€ 39 865 brutto)
- Plassering:
- Eichenstich 12, 21272 Egestorf, DE

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 14 200 kg
- Totalvekt:
- 19 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 7 000 mm
- Lasteplassbredde:
- 2 470 mm
- Lasteromshøyde:
- 400 mm
Detaljer om tilbudet
- Annonse-ID:
- A104-33-237
- Referansenummer:
- 60281
- Oppdatering:
- sist oppdatert 25.06.2025
Beskrivelse
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
Codel Tp Azspfx Agcori
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
Codel Tp Azspfx Agcori
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil











































