Lavtlaster tilhengerMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Lavtlaster tilhenger
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
fast pris pluss MVA
€ 39 950
(€ 47 540 brutto)
produksjonsår
2026
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 39 950
(€ 47 540 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 13 700 kg
- Totalvekt:
- 18 000 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 7 000 mm
- Lasteplassbredde:
- 2 480 mm
Detaljer om tilbudet
- Annonse-ID:
- A104-34-410
- Referansenummer:
- 60291
- Oppdatering:
- sist oppdatert 24.10.2025
Beskrivelse
* TRA 18.0:
* 2 in 1 = suitable for roll-off containers and as a low-loader
* RDÜ (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release for spring brake cylinders
* Drum brakes
* 2 x 10 ton axles
* Air suspension with manual lowering at the rear
* Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism
* Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, as well as a spare wheel holder in basket design on the right side
* Reflective contour tape on sides and rear
* Side underrun protection
Dwodpfx Asl Tq Nmsgcod
* Plastic quarter mudguards with spray protection
* Rear plastic buffer guards
* Foldable "A" sign at rear
* LED tail lights
* 15-pin electrical connector
* Main frame with raised outer rails for guiding roll containers
* Steel floor with roller recesses in the turntable area
* Container length possible from 5,500 to 7,000 mm
* Pneumatic 4-point locking clamp, plus mechanical plug-in stop angles at the front in the running track, load securing certificate according to DIN 30722-1
* Lashing package consisting of: 1 pair of 10 t UVV lashing rings at the front on the front wall beam, 3 pairs of 10 t UVV lashing rings on the side in the outer frame, 4 x 2 t clover-shaped lashing eyes per side, and 4 x 8 t recessed lashing shackles in the outer frame
* Weld bead as anti-slip coating in the ramp area of the running path
* Mechanical drop-down support legs at the rear
* 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
* Chassis, turntable, locking parts, and rear drop-down supports are hot-dip galvanized
* Drawbar, axles, and air reservoir painted in a shade of black
* New vehicle without initial registration, full manufacturer's warranty
* Errors and prior sale excepted
* Available from CW 05/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
* 2 in 1 = suitable for roll-off containers and as a low-loader
* RDÜ (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release for spring brake cylinders
* Drum brakes
* 2 x 10 ton axles
* Air suspension with manual lowering at the rear
* Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism
* Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, as well as a spare wheel holder in basket design on the right side
* Reflective contour tape on sides and rear
* Side underrun protection
Dwodpfx Asl Tq Nmsgcod
* Plastic quarter mudguards with spray protection
* Rear plastic buffer guards
* Foldable "A" sign at rear
* LED tail lights
* 15-pin electrical connector
* Main frame with raised outer rails for guiding roll containers
* Steel floor with roller recesses in the turntable area
* Container length possible from 5,500 to 7,000 mm
* Pneumatic 4-point locking clamp, plus mechanical plug-in stop angles at the front in the running track, load securing certificate according to DIN 30722-1
* Lashing package consisting of: 1 pair of 10 t UVV lashing rings at the front on the front wall beam, 3 pairs of 10 t UVV lashing rings on the side in the outer frame, 4 x 2 t clover-shaped lashing eyes per side, and 4 x 8 t recessed lashing shackles in the outer frame
* Weld bead as anti-slip coating in the ramp area of the running path
* Mechanical drop-down support legs at the rear
* 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
* Chassis, turntable, locking parts, and rear drop-down supports are hot-dip galvanized
* Drawbar, axles, and air reservoir painted in a shade of black
* New vehicle without initial registration, full manufacturer's warranty
* Errors and prior sale excepted
* Available from CW 05/2026
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonsen din har blitt slettet
Det har oppstått en feil



































































