Lavtlaster tilhenger

HUMBAUR HBT 106224 BS Basic abgeschrägt

Humbaur HBT 106224 BS Basic bevelled---- * Technical data:
* Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
* Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
* Permissible. Total weight: 11,900 kg
* Payload: approx. 9,100 kg
* Wheelbase: 990 mm
* Tires: 235/75 R17.5 inches
* Loading height: approx. 920 mm
* Drawbar length: approx. 1,800 mm
* Coupling height: approx. 750-1,000 mm
* Ramp angle: approx. 16°
* Plank length: approx. 2,600 mm
* Plank width: approx. 540 mm
* 3 pairs of lashing rings, 3,000 kg per lashing point
* Lashing rings sunk into the bridge floor
* 7 pairs of lashing rings, 1,000 kg per lashing point
* Lashing rings in the outer frame----
* Standard equipment:
* Axles
* Axles from well-known manufacturers
* Suspension
* Low-maintenance parabolic suspension with load compensation
Rcodpfx Aoryhicea Dok
* Tires
* Tires according to Manufacturer's choice on steel rim
* Brake system
* ABS brake system in accordance with ECE directive with ALB function
* ABS plug connection ISO 7638
* Spindle parking brake
* 2 interchangeable coupling heads red/yellow ISO 1728
* Towing device
* Towing tube with DIN screw towing eyelet Ø 40mm, galvanized, infinitely adjustable via crank
* Electrics
* 24V lighting system with multi-chamber rear lights and LED side marker lights
* 15-pin connector plug for lighting
* Frame
* Solid, welded and hot-dip galvanized frame
* Rear area beveled, gradient 12°
* Floor
* Floor covering made of 40mm softwood planks
* Side walls
* Side walls made of anodized aluminum
* Can be folded down to the side and removed
* Galvanized corner stanchions, can be plugged in at the front and rear
* Ramps
* 2 foldable steel ramps, 1-piece, galvanized, can be moved sideways
* Ramp jack 1 gas pressure spring per ramp
* Ramp securing on rear stanchion
* Ramp covering made of galvanized grating
* Support
* Reinforced 12 t geared support winch with load and fast gear
* 2 telescopic folding supports on the left and right at the rear of the vehicle
* Equipment
* Steel fender with anti-spray mats
* Side impact protection up to the 1st axle, foldable
* 2 wheel chocks with holder
* Contour marking on the side and rear
* Space for a two-line license plate on the left ramp

We can make you a leasing or financing offer on request.

Mr. Seidel (Tel.  will be happy to assist you.

You can find more information on our homepage.

!!! Errors, changes and prior sale reserved!!!

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.