Lavbygd semitrailer

FAYMONVILLE MAX Trailer 3+5 Tiefbett (Baggerbett)

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment features. Full specification available upon request.

Gooseneck
* Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4

3-Axle Compact Front Bogie
* Hook couplings front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm

Excavator Deck
* Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear
* Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm

5-Axle Rear Bogie
* Mechanical bolt coupling for front connection of a low-bed, rear end traverse
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendulum axle

Front Bogie
* PENDULUM AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position
* Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint
* Technical axle load: 14,640 kg per axle (62 km/h)
* Hydraulic axle compensation
* Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle

5-Axle Rear Bogie
* PENDULUM AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position
* Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint
* Technical axle load: 14,640 kg per axle (62 km/h)
* Hydraulic axle compensation
* Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J

Paintwork
* HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection
* Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey

Incl. Accessories
* Steel front wall, approx. 400 mm high
* Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck
* 3.5" kingpin
* BEKA-MAX central lubrication system for one gooseneck
* Multi-coupling hydraulic connections on the gooseneck
* BEKA-MAX central lubrication system for one 3-axle bogie
* One 7-pin socket left and right rear on the front bogie for warning signs
* Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN)
Kodjuvbdtjpfx Agdedi
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart
* Steel mattresses with rubber flooring approx. 12 mm thick
* One 7-pin socket left and right, front and rear of the rear bogie for warning signs
* BEKA-MAX central lubrication system for one 5-axle bogie
* Socket on the rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.