Tresidet tipphengerMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Anlegerampen
Tresidet tipphenger
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Anlegerampen
fast pris pluss MVA
€ 25 750
(€ 30 642 brutto)
Produksjonsår
2025
Tilstand
Ny
Plassering
Egestorf 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 25 750
(€ 30 642 brutto)
- Selgers plassering:
- Eichenstich 12, 21272 Egestorf, Tyskland

Ring
Tekniske detaljer
- Maksimal lastevekt:
- 8 600 kg
- Totalvekt:
- 11 900 kg
- Akselkonfigurasjon:
- 2 aksler
- Lasteromslengde:
- 5 000 mm
- Lasteplassbredde:
- 2 420 mm
- Lasteromshøyde:
- 500 mm
Detaljer om tilbudet
- Annonse-ID:
- A186-01-846
- Referansenummer:
- 6138
- Oppdatering:
- sist oppdatert 19.12.2025
Beskrivelse
* KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Draw Eye:
* Height-adjustable by 300 mm, hot-dip galvanized drawbar with 40 mm flange draw eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
* 15-pin power connector
Ksdpsv Dz N Aefx Aa Djfa
----General Fittings:
* Galvanized steel toolbox, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing gear at the front
* Two rear mechanical, hot-dip galvanized drop-down supports
----Tipping Body:
* Net hooks on the sides and rear in the central locking bearings, as well as 3 additional hooks on the outer front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper structure
* Continuous sidewalls without center stanchion, fold-down with drop-side spring lifts
* Tailgate foldable and pendulum-type, manually central-locked
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp guide rails for loading ramps
----Load Securing:
* One foldable, recessed lashing ring (5 t) in each corner
* Four foldable, recessed lashing rings (3 t each) integrated into the side outer frame
----Ramps:
* 1 pair of aluminum access ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps, recessed under the loading floor in the chassis, accessed from the rear
----Tires:
* Tires 235/75 R 17.5
----Paint:
* Axles, springs, air tanks, drawbar, and landing gear painted black
* Sideboard painted RAL 9010 pure white
* Sidewalls can be painted in any RAL color upon request (additional cost)
* Floor and front wall hot-dip galvanized
----Info:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Availability:
* Available immediately ex works Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
----Brakes:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Draw Eye:
* Height-adjustable by 300 mm, hot-dip galvanized drawbar with 40 mm flange draw eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
* 15-pin power connector
Ksdpsv Dz N Aefx Aa Djfa
----General Fittings:
* Galvanized steel toolbox, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing gear at the front
* Two rear mechanical, hot-dip galvanized drop-down supports
----Tipping Body:
* Net hooks on the sides and rear in the central locking bearings, as well as 3 additional hooks on the outer front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper structure
* Continuous sidewalls without center stanchion, fold-down with drop-side spring lifts
* Tailgate foldable and pendulum-type, manually central-locked
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear ramp guide rails for loading ramps
----Load Securing:
* One foldable, recessed lashing ring (5 t) in each corner
* Four foldable, recessed lashing rings (3 t each) integrated into the side outer frame
----Ramps:
* 1 pair of aluminum access ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps, recessed under the loading floor in the chassis, accessed from the rear
----Tires:
* Tires 235/75 R 17.5
----Paint:
* Axles, springs, air tanks, drawbar, and landing gear painted black
* Sideboard painted RAL 9010 pure white
* Sidewalls can be painted in any RAL color upon request (additional cost)
* Floor and front wall hot-dip galvanized
----Info:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Availability:
* Available immediately ex works Egestorf
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2001
Send forespørsel
Telefon & Faks
+49 40 33... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Egestorf
816 km
Lavtlaster tilhenger
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Annonse
Egestorf
816 km
Tresidet tipphenger
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Annonse
Egestorf
816 km
Tresidet tipphenger
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Annonsen din har blitt slettet
Det har oppstått en feil









































































































