TrearbeidEschlböck Biber
BIBER 60 ZK
Trearbeid
Eschlböck Biber
BIBER 60 ZK
fast pris pluss MVA
€ 159 900
(€ 190 281 brutto)
produksjonsår
2023
Tilstand
Brukt
Plassering
Grimma 

Bilder viser
Vis kart
Grunnleggende data
Pris og beliggenhet
fast pris pluss MVA
€ 159 900
(€ 190 281 brutto)
- Selgers plassering:
- August-Bebel-Straße 19c, 04668 Grimma, Tyskland

Ring
Tekniske detaljer
- Utstyr:
- trykkluftbrems
Detaljer om tilbudet
- Annonse-ID:
- A186-75-026
- Referansenummer:
- 300127715
- Oppdatering:
- sist oppdatert 25.09.2025
Beskrivelse
BIBER 60 ZK
Eschlböck chipper
with 3 cm sieve
Biber 60 ZK for crane loading with crane
Epsilon C50F 86
> Chipping system: drum chipper
> Wood diameter up to 40 cm
> Feed opening 40 x 70 cm
> Feed chain belt long (2 m)
> Loading from the side
> Chipping drum with 10 chipping knife blades offset in pairs
> Counter knife (three-part) can be used twice
> Drum diameter: 648 mm
> Easily changeable sieves: 3 or 5 cm
chip length
> Series includes 1 sieve, installed for
the desired chipping length
> Discharge: screw discharge including
clearing system,
blower diameter approx. 1270 mm
> Own hydraulic circuit with 220l
hydraulic tank with level and
temperature indicator for hydraulic oil
> Reinforced hydraulic drive
with gearbox assisted intake
> Control panel for all functions:
can be plugged into the machine, with
cable remote control,
can be mounted in the tractor cab
> Intake belt and rocker
can be operated electro-hydraulically
> Smart control for controlling the
intake speed including
visualization,
operator-guided control, adjustable
chopping length and automatic overload (no
stress)
including operating hour counter (daily and
total operating hours)
> Discharge arch can be raised and folded down hydraulically, can be rotated continuously by 240°
with adjustable discharge flap
> Raise and lower intake trough
> Drive: via the PTO (from approx. 80
kW to max. 150 kW)
> PTO speed 1000 rpm
> V-belt drive for SPC belts
Gbedpfx Aov H Smwjdkew
> PTO shaft with overload and
freewheel clutch
> Driving axle including lighting, hitch
above or below, tire size 560/45 R 22.5
> Paintwork: RAL 3020 traffic red
Crane Epsilon C50F86
> Max. reach 8.60 m
> Net load moment 54 kNm
> Net swivel moment 18 kNm
> With foldable crane loading trough
> Single axle 40 km/h or 60 km/h incl.
2-circuit compressed air brake
> Automatic trailer coupling for
compressed air-braked
2-axle trailer up to 8 t GG
> Crane with support
> Incl. 4-finger gripper HSP 020BIO HD
and rotator
> Danfoss control block with electric
joystick, Prof 1 operation, 6
proportional and 2
black/white functions for hydraulic
Support feet (cable remote control),
> 2x LED headlights
> Oil supply to the crane from the tractor,
Oil requirement minimum 120 l /min.
> Load-sensing control from the tractor
required
> Weight approx. 8230 kg
Split beaver for beaver 60
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Eschlböck chipper
with 3 cm sieve
Biber 60 ZK for crane loading with crane
Epsilon C50F 86
> Chipping system: drum chipper
> Wood diameter up to 40 cm
> Feed opening 40 x 70 cm
> Feed chain belt long (2 m)
> Loading from the side
> Chipping drum with 10 chipping knife blades offset in pairs
> Counter knife (three-part) can be used twice
> Drum diameter: 648 mm
> Easily changeable sieves: 3 or 5 cm
chip length
> Series includes 1 sieve, installed for
the desired chipping length
> Discharge: screw discharge including
clearing system,
blower diameter approx. 1270 mm
> Own hydraulic circuit with 220l
hydraulic tank with level and
temperature indicator for hydraulic oil
> Reinforced hydraulic drive
with gearbox assisted intake
> Control panel for all functions:
can be plugged into the machine, with
cable remote control,
can be mounted in the tractor cab
> Intake belt and rocker
can be operated electro-hydraulically
> Smart control for controlling the
intake speed including
visualization,
operator-guided control, adjustable
chopping length and automatic overload (no
stress)
including operating hour counter (daily and
total operating hours)
> Discharge arch can be raised and folded down hydraulically, can be rotated continuously by 240°
with adjustable discharge flap
> Raise and lower intake trough
> Drive: via the PTO (from approx. 80
kW to max. 150 kW)
> PTO speed 1000 rpm
> V-belt drive for SPC belts
Gbedpfx Aov H Smwjdkew
> PTO shaft with overload and
freewheel clutch
> Driving axle including lighting, hitch
above or below, tire size 560/45 R 22.5
> Paintwork: RAL 3020 traffic red
Crane Epsilon C50F86
> Max. reach 8.60 m
> Net load moment 54 kNm
> Net swivel moment 18 kNm
> With foldable crane loading trough
> Single axle 40 km/h or 60 km/h incl.
2-circuit compressed air brake
> Automatic trailer coupling for
compressed air-braked
2-axle trailer up to 8 t GG
> Crane with support
> Incl. 4-finger gripper HSP 020BIO HD
and rotator
> Danfoss control block with electric
joystick, Prof 1 operation, 6
proportional and 2
black/white functions for hydraulic
Support feet (cable remote control),
> 2x LED headlights
> Oil supply to the crane from the tractor,
Oil requirement minimum 120 l /min.
> Load-sensing control from the tractor
required
> Weight approx. 8230 kg
Split beaver for beaver 60
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2017
Send forespørsel
Telefon & Faks
+49 3437 ... annonser
Annonsen din har blitt slettet
Det har oppstått en feil










