Ballepresse (landbruk)Claas
ROLLANT 630 RC UNIWRAP
Ballepresse (landbruk)
Claas
ROLLANT 630 RC UNIWRAP
produksjonsår
2025
Tilstand
Brukt
Plassering
Hartmannsdorf 

Bilder viser
Vis kart
Grunnleggende data
- Betegnelse:
- Ballepresse (landbruk)
- produsent:
- Claas
- Modell:
- ROLLANT 630 RC UNIWRAP
- produksjonsår:
- 2025
- Tilstand:
- brukt
Pris og beliggenhet
- Selgers plassering:
- Mühlauer Straße 11, 09232 Hartmannsdorf, Tyskland
Ring
Detaljer om tilbudet
- Annonse-ID:
- A194-50-336
- Referansenummer:
- 11362406
- oppdatering:
- sist oppdatert 28.06.2025
Beskrivelse
Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap
Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025)
Technical specifications:
- Baler-wrapper combination with 1.25 m chamber diameter
- Chamber width 1.20 m
MULTIFLOW pickup:
- Pickup width 2.10 m
- Gauge wheels, pendulum mounted, with 16x6.5-8 tyres
- Dual feed augers
PRO cutting floor:
- Hydraulic suspension and lowering cutting floor to prevent blockages
- Operation via terminal including optical and acoustic signals
ROTO CUT cutting rotor:
- Cutting rotor with four spirally arranged tine rows
- Individually protected knives against foreign objects
- Hydraulic knife group selection
Chamber:
- 16 profiled steel rollers
- Rear door with hydraulic locking
- Greasable baler roller bearings
Wrapping unit:
- Fully automatic control
- Twin wrapping arms with 750 mm film pre-stretchers
- Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds
- Terminal for direct access at the wrapping table
- Hydraulically lowerable film magazines for 12 spare rolls
- PROFI CAM camera and work light for wrapper illumination
- Continuous chain lubrication
- Hand wash tank incl. soap dispenser
- Hydraulic requirements: load-sensing and 1 x single-acting
Equipment:
MULTIFLOW Pickup HD with twin roller hold-down
Dummy knives, set of 25
ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives
PREMIUM LINE knife set, 25 pieces
Film pre-stretch 82%
Gjdpfxjwvwtaj Ah Reuh
Bale transfer guide
ROLLATEX net tying
Single wide-angle PTO shaft with cam-type clutch, 6-piece
Tractor hydraulic connection, comfort
Adjustable support stand
Hydraulic/electronic ROTO CUT swinging floor
K80 ball head hitch, MR
Tyres: 600/55 R26.5
Dual-line compressed-air brake system, up to 40/50 km/h
LED high-end work lights including service lighting
Screen for PROFI CAM
CEMIS 700
Automatic central lubrication system, electrically actuated
Extended tool set | Internal no.: 11264178
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025)
Technical specifications:
- Baler-wrapper combination with 1.25 m chamber diameter
- Chamber width 1.20 m
MULTIFLOW pickup:
- Pickup width 2.10 m
- Gauge wheels, pendulum mounted, with 16x6.5-8 tyres
- Dual feed augers
PRO cutting floor:
- Hydraulic suspension and lowering cutting floor to prevent blockages
- Operation via terminal including optical and acoustic signals
ROTO CUT cutting rotor:
- Cutting rotor with four spirally arranged tine rows
- Individually protected knives against foreign objects
- Hydraulic knife group selection
Chamber:
- 16 profiled steel rollers
- Rear door with hydraulic locking
- Greasable baler roller bearings
Wrapping unit:
- Fully automatic control
- Twin wrapping arms with 750 mm film pre-stretchers
- Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds
- Terminal for direct access at the wrapping table
- Hydraulically lowerable film magazines for 12 spare rolls
- PROFI CAM camera and work light for wrapper illumination
- Continuous chain lubrication
- Hand wash tank incl. soap dispenser
- Hydraulic requirements: load-sensing and 1 x single-acting
Equipment:
MULTIFLOW Pickup HD with twin roller hold-down
Dummy knives, set of 25
ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives
PREMIUM LINE knife set, 25 pieces
Film pre-stretch 82%
Gjdpfxjwvwtaj Ah Reuh
Bale transfer guide
ROLLATEX net tying
Single wide-angle PTO shaft with cam-type clutch, 6-piece
Tractor hydraulic connection, comfort
Adjustable support stand
Hydraulic/electronic ROTO CUT swinging floor
K80 ball head hitch, MR
Tyres: 600/55 R26.5
Dual-line compressed-air brake system, up to 40/50 km/h
LED high-end work lights including service lighting
Screen for PROFI CAM
CEMIS 700
Automatic central lubrication system, electrically actuated
Extended tool set | Internal no.: 11264178
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2017
Send forespørsel
Telefon & Faks
+49 3722 ... annonser
Disse annonsene kan også være av interesse for deg.
Annonse

997 km
Ballepresse (landbruk)
ClaasROLLANT 630 RC UNIWRAP
ClaasROLLANT 630 RC UNIWRAP
Annonsen din har blitt slettet
Det har oppstått en feil