Semitrailer med lavt lasteplan

MAX Trailer 2-Achs-Tiefbett mit Pendelachsen

For every used semi-trailer, you receive a current and comprehensive inspection and functionality report.

Nsdpfow S Tt Hjx Adtewp
Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, length approx. 3,750 mm
- Gooseneck hydraulically height-adjustable and detachable
- Technical fifth-wheel load: 23,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4

Loading Platform:
- Lowbed with external beams, extendable "SUPER LOW" design, length approx. 6,850 mm
- Lowbed features fixed hardwood flooring approx. 40 mm thick with mechanical locking
- 5 pairs of fold-out lashing rings
- 6 pairs of threaded blocks on the inner beams for mounting bolt-on RUD rings

Rear Running Gear:
- Rear running gear with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear

Pendulum Axle and Tyres:
- "PENDULUM-AXLE," all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and retaining pins to secure in raised position
- Axles top-coated with 2 layers of 2K paint, single-color, in grey
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres 245/70 R 17.5

Included Accessories:
- Preparation for bolt-on container locating positions for 1x 20ft or 1x 40ft container on the external beams
- 2" kingpin
- A galvanized steel front wall approx. 400 mm high
- A spare wheel with holder
- At the galvanized front connector strip, yellow-red air couplings
- 4 wheel chocks with holders
- Remote steering from front and rear via cable remote control with push buttons, including axle single-tracking control
- Hydraulic couplings from gooseneck to lowbed with multi-coupling instead of threaded couplings
- Electro-hydraulic power unit
- 2 wooden blocks 500x250x200 mm
- A bracket for a rotating beacon at the rear
- A mudflap at the rear
- European reflective signs (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
- Central lubrication system with 2 BEKAMAX pumps
- Load gauge to determine axle loads including load chart
- 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beams for mounting bolt-on RUD VLBG-4 rings
- 2 pairs of bolt-on container mounts on the outer beams, incl. 2 pairs of container locks for 1x 20ft or 1x 40ft container
- On the gooseneck, plug-in aluminum side and rear walls approx. 2,440 x 400 mm
- A stainless steel toolbox 1,350 x 400 x 400 mm on the gooseneck
- 5 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
- Foldable extensions, approx. 230 mm per side
- Extension planks made of hardwood
- Maximum load capacity on a 200 x 200 mm area is 3.5 tons
- 1 pair of steel ramps to bridge the mounting hooks of the lowbed
- On the loading platform, a painted sand layer as anti-slip protection
- 2 reversing spotlights on the rear panel
- Spoon handle trough of the rear running gear closed at front and rear with plug-in plates
- Four warning panels extendable by approx. 400 mm, approx. 423 x 423 mm, with position light
- HRM metallization (High Resistance Metallisation) of the outer frame

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.