Arbeidsplattform semitrailerES-GE
3-Achs Sattelanhänger - Bordwände + CV
Arbeidsplattform semitrailer
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Tilstand
Ny
Plassering
Essen 

Grunnleggende data
Pris og beliggenhet
- Selgers plassering:
- Heegstraße 6-8, 45356 Essen, Tyskland

Ring
Tekniske detaljer
Dimensjoner og vekt
Totalvekt:
43 000 kg
Total bredde:
2 550 mm
Aksler og hjul
Akselkonfigurasjon:
3 aksler
Sikkerhetsfunksjoner
ABS
Detaljer om tilbudet
- Annonse-ID:
- A199-16-705
- Referansenummer:
- 36623
- Oppdatering:
- sist oppdatert 28.10.2025
Beskrivelse
You can find our complete range of vehicles, including immediately and soon available units, on our website.
Equipment excerpt; full equipment details available on request.
Chassis:
* Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads
* Underrun bar width approx. 700 mm
* Outer frame as UNP profile
* Fifth wheel plate approx. 8mm
* Neck height at front approx. 130 mm
Coupling device
* 2-inch kingpin
Rear underrun protection
* Bolted version, in compliance with EC regulations
Side underrun protection
* According to EC regulations, made of anodised aluminium profiles
Landing legs
* 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel
Axles
* 3 x 9 t air suspension axle assemblies, disc brakes 22.5”
* Total stroke approx. 180 mm
* Lifting and lowering device via rotary slide valve
Braking system
* Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control
* Spring chamber cylinders as parking brake
* Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle
Tyres
* 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice
* Tyre pressure monitoring system (TPMS) via EBS CAN bus
Mudguards
* According to EC regulations
Spare wheel holder
not included
Load securing
* 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t
* 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t
* Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame
Front wall
* Reinforced fixed steel structure, approx. 1,400 mm high
* Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles
Isdpfx Apsw U H Sbj Dsbd
Lighting system
* In compliance with EC, 24 volt, with multi-chamber lights
* LED side marker lights
* Front white LED position lights
* Rear LED outline marker lights
* Number plate lights
* LED lane departure lights
* 1x15- and 2x7-pin plug connections at the front cross member
Equipment
* 2 wheel chocks with holders
* ECE 70 warning boards
* Bracket for rotating beacon, incl. rotating beacon
* 2 rubber buffers at the rear
* Foldable and extendable access ladder at rear right (without platform)
* 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles
Paintwork
* Front wall: RAL single colour as requested
* Chassis: hot dip galvanised
* Outer frame: hot dip galvanised + single RAL colour as requested
* Centre stanchions: single RAL colour as requested
* SSV: aluminium, anodised
* Rear underrun protection: white (RAL 9016 traffic white)
* Attachments: galvanised / KTL black
* Rims: silver
Conspicuity markings
* Complete set in yellow
Including special equipment
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stanchion pockets in the outer frame, evenly distributed
* 4 rows of stanchion pockets across the loading area
* 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm
* Magazine for 20 removable stanchions inside the front wall
* 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable
* Removable Kinnegrip stanchions
* Side wall and stanchi
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Equipment excerpt; full equipment details available on request.
Chassis:
* Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads
* Underrun bar width approx. 700 mm
* Outer frame as UNP profile
* Fifth wheel plate approx. 8mm
* Neck height at front approx. 130 mm
Coupling device
* 2-inch kingpin
Rear underrun protection
* Bolted version, in compliance with EC regulations
Side underrun protection
* According to EC regulations, made of anodised aluminium profiles
Landing legs
* 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel
Axles
* 3 x 9 t air suspension axle assemblies, disc brakes 22.5”
* Total stroke approx. 180 mm
* Lifting and lowering device via rotary slide valve
Braking system
* Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control
* Spring chamber cylinders as parking brake
* Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle
Tyres
* 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice
* Tyre pressure monitoring system (TPMS) via EBS CAN bus
Mudguards
* According to EC regulations
Spare wheel holder
not included
Load securing
* 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t
* 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t
* Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame
Front wall
* Reinforced fixed steel structure, approx. 1,400 mm high
* Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles
Isdpfx Apsw U H Sbj Dsbd
Lighting system
* In compliance with EC, 24 volt, with multi-chamber lights
* LED side marker lights
* Front white LED position lights
* Rear LED outline marker lights
* Number plate lights
* LED lane departure lights
* 1x15- and 2x7-pin plug connections at the front cross member
Equipment
* 2 wheel chocks with holders
* ECE 70 warning boards
* Bracket for rotating beacon, incl. rotating beacon
* 2 rubber buffers at the rear
* Foldable and extendable access ladder at rear right (without platform)
* 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles
Paintwork
* Front wall: RAL single colour as requested
* Chassis: hot dip galvanised
* Outer frame: hot dip galvanised + single RAL colour as requested
* Centre stanchions: single RAL colour as requested
* SSV: aluminium, anodised
* Rear underrun protection: white (RAL 9016 traffic white)
* Attachments: galvanised / KTL black
* Rims: silver
Conspicuity markings
* Complete set in yellow
Including special equipment
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stanchion pockets in the outer frame, evenly distributed
* 4 rows of stanchion pockets across the loading area
* 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm
* Magazine for 20 removable stanchions inside the front wall
* 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable
* Removable Kinnegrip stanchions
* Side wall and stanchi
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2003
59 Annonser på nett
Send forespørsel
Telefon & Faks
+49 201 8... annonser
Disse annonsene kan også være av interesse for deg.
Vellykket
Meldingen din er sendt.
Annonse
Röttenbach
1 270 km
Standard trekkvogn
DAFXF 530 FT *LL*TÜV*SP*ACC*Standklima*Vollverkleid
DAFXF 530 FT *LL*TÜV*SP*ACC*Standklima*Vollverkleid
Vellykket
Meldingen din er sendt.
Annonse
Renswoude
952 km
Nooteboom MCO-S-48-03 | HYDRAULISKE RAMPPER / BRO / STYRING
NooteboomMCO-S-48-03 | HYDRO RAMPS / BRIDGE / STEERING |
NooteboomMCO-S-48-03 | HYDRO RAMPS / BRIDGE / STEERING |
Vellykket
Meldingen din er sendt.
Annonse
Coesfeld
957 km
Vakuumtankbil
DAFXF530 FT 4x2 mit Kroll, ADR Saug- /Druckanhänger
DAFXF530 FT 4x2 mit Kroll, ADR Saug- /Druckanhänger
Vellykket
Meldingen din er sendt.
Annonse
Hedel
991 km
Volvo FH540 6x2!! KRANBIL/HIAB 55 tm! TOPP! DK1315
VolvoFH540 6x2!! KRAANWAGEN/HIAB 55tm! TOP!
VolvoFH540 6x2!! KRAANWAGEN/HIAB 55tm! TOP!
Vellykket
Meldingen din er sendt.
Annonse
Dortmund
1 001 km
Semitrailer med lavt lasteplan
MAX Trailer3-Achs-Tele-Plateau-zwangsgelenkt
MAX Trailer3-Achs-Tele-Plateau-zwangsgelenkt
Vellykket
Meldingen din er sendt.
Annonse
Gilze
1 017 km
DAF CF 440 6X2*4 / HMF 40 tm KRAN / KRAN
DAFCF 440 6X2*4 / HMF 40 tm CRANE / KRAN
DAFCF 440 6X2*4 / HMF 40 tm CRANE / KRAN
Vellykket
Meldingen din er sendt.
Annonse
Lübbecke
907 km
DAF XF 106 510 SSC trekkvogn med én eier
DAFXF 106 510 SSC 1-Hand
DAFXF 106 510 SSC 1-Hand
Vellykket
Meldingen din er sendt.
Annonse
Mainz
1 165 km
Beholder for beskyttelse av kontorcontainer
Bürocontainer
Bürocontainer
Vellykket
Meldingen din er sendt.
Annonse
Wien
1 456 km
Skipscontainer
20 Fuß RAL9005 CONTAINER SEECONTAINERLAGERCONTAINER SELF STORAGE NEU
20 Fuß RAL9005 CONTAINER SEECONTAINERLAGERCONTAINER SELF STORAGE NEU
Vellykket
Meldingen din er sendt.
Annonse
Triptis
1 102 km
åpen semitrailer
Fliegl3-Achs Plateau Sattel SDS 380 Mega
Fliegl3-Achs Plateau Sattel SDS 380 Mega
Annonsen din har blitt slettet
Det har oppstått en feil




















































































































































































