Lavbygd semitrailer

FAYMONVILLE MAX Trailer MAX510 Tiefbett 3x12 t PA

You can find our entire stock of vehicles, including those available immediately and at short notice, on our website.

Extract from the specifications. Full equipment list available upon request.

Gooseneck:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractors: 6 x 4 or 8 x 4

Low bed:
* Low bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long
* Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking
* Supply lines are protected within the extendable beams and automatically adapt to the respective low bed length
* 7 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN)
* 6 pairs of threaded blocks on the inner beams for mounting bolted RUD rings

Rear chassis:
* Rear chassis with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the rear
* 2 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN)
* 1 pair of lashing rings, lying flat in the recess (approx. LC 10,000 daN)
* 2 pairs of lashing rings, lying flat in the recess (approx. LC 16,000 daN)
* 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame

PENDLE AXLE:
* PENDLE AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic reset function
* Hydraulic cylinders with shut-off valves and locking pins to secure in the raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Axle tool

Tyres:
* Tyres 245/70 R 17.5 3PMSF – brand at our discretion
* Load index (146/146F)

Brake system:
* Wabco brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit

Paintwork:
* Entire steel structure automatically blast-cleaned after welding using a shot blasting unit
* Second blast treatment with corundum for optimum coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection
* Final paint finish with 2 coats of 2K topcoat, single-color in RAL 3002 Carmine Red according to RAL system 841GL

Including the following accessories:
* Preparation for installation of bolted container placements for 1x 20' or 1x 40' container on the external beams
* Without container locks
* 3.5 inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Remote-controlled steering from the front and rear via cable remote with push buttons, with axle tracking control (without installation on the tractor unit)
* Electro-hydraulic unit
* On the gooseneck, removable aluminum side and rear walls, approx. 2,000 x 400 mm (L x H)
* The rear galvanized plug-in stakes are removable (superstructure length approx. 2,120 mm)
* Hydraulic connections from the gooseneck to the low bed via multi-coupling instead of screw couplings (no guarantee on seals)
* Separate air connection with air gun on gooseneck
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area
* One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
Isdpoxbmprjfx Aa Rsbd
* 2 pairs of boltable lashing rings M20 (LC 5,000 daN)
* 2 pairs of boltable RUD rings VLBG-4 M24 (LC 8,000 daN)
* Folding extensions, approx. 230 mm per side, widening planks made of hardwood. The maximum load is distributed on an area of appr

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.