Semitrailer med lavt lasteplan

Faymonville 3-Achs-Beton-Innenlader-PrefaMAX

You will receive a current and complete inspection and functional report with every used trailer.

Gooseneck:
- Gooseneck designed as a loading area with an aluminum checker plate surface, front tapered at approx. 45°
- Hydraulic lifting pendulum, approx. -280/+250 mm adjustable raising and lowering
- Two king pin positions at 2,300 mm and 2,000 mm
- Suitable for tractor units: 4x2, 6x2, or 6x4

Loading well:
- Loading area approx. 9,500 mm long, with lower-mounted angle profiles for pallet loading support
- Distance from king pin to center of axle assembly is approx. 8,000 mm

Axles, suspension and tires:
- BPW stub axles with drum brakes and independent suspension, hydraulic axle compensation with lift and lower function
- Lowering protection on axles in case of air suspension hose rupture, designed for a maximum pallet height of 150 mm
- Axle tools
- Tyres: 385/65 R 22.5

Brake system:
- WABCO EBS braking system in accordance with EU regulations

Paintwork:
- 6-stage final treatment
- Final coat with two layers of 2K acrylic paint, single color, RAL 5010 Gentian Blue

Accessories included:
- 2" king pin
- 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN)
- Lighting for the operation of gooseneck, suspension and hydraulic tensioning, with on/off switch
- Mechanical drop support legs rated for approx. 48,000 kg
- 4 wheel chocks with holder
- Climbing ladder mounted at the front left and right, with 2 plug-in handrails
- Removable full side cladding on both sides before the axle assembly
- WABCO Roll Stability Support (RSS)
- 9 pairs of lashing rings (LC 6,300 daN) on the longitudinal frames
- Grating platform flush-fitted between cargo securing rails on the longitudinal frames
- Hydraulic preparation including controls for mounting 3 pairs of hydraulic load restraints
- First and last axle manually liftable left and right
- Lockable storage box, splash-proof, behind the axle unit left and right
- Rear taper for easier pallet loading
- Rear tow eyes attached to end traverse for mechanical tensioning
- Rear door with cross bracing, left hinged and right hydraulically locked, lockable at approx. 90°, 105° and 270° horizontally
- Upwards folding underrun protection for transporting up to 4 empty standard pallets, without width adjustment
- License plate holder
- Electro-hydraulic power pack for hydraulic operations
- "Anderson" socket on the front connector rail
- Central lubrication system with 1 pump, make BEKAMAX, standard grease configuration
Dedpfsxl Uayex Af Hswc
- Removable steel front wall, approx. 400 mm high
- On the gooseneck: 1 pair of foldable aluminum side boards, approx. 400 mm high, anodised
- On the gooseneck: removable aluminum rear board, approx. 400 mm high, anodised
- 1 INOX toolbox with 1 lid, behind the front wall on the gooseneck, approx. 1,350 x 400 x 400 mm
- 1 work light each, left and right, mounted at the top of the front wall
- 2 axle load gauges mounted on the left side
- 3 pairs of hydraulic load restraints with pivoting arms, mounted and horizontally adjustable on the longitudinal frame
- Lower crossbar on rear traverse with eccentric lock
- 1 reversing spotlight each, left and right, at the rear of the vehicle
- HRM metallisation (High Resistance Metallisation) – the complete steel structure shot-blasted to SA2.5–SA3 standard, then hot-dipped with ZINACOR 850 (zinc 85% – aluminium 15%)

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.